HV825 データシートの表示（PDF） - Supertex Inc
部品番号
コンポーネント説明
メーカー
HV825 Datasheet PDF : 5 Pages
| |||
HV825
High Voltage EL Lamp Driver IC
Features
► Processed with HVCMOS® technology
► 1.0V to 1.6V operating supply voltage
► DC to AC conversion
► Output load of typically up to 6nF
► Adjustable output lamp frequency
► Adjustable converter frequency
► Enable function
Applications
► Pagers
► Portable Transceiver
► Cellular phones
► Remote control units
► Calculators
HV825 Block Diagram
VDD
RSW-Osc
GND
Switch
Osc
REL-Osc
General Description
The Supertex HV825 is a high voltage driver designed for driving
EL lamps typically up to 6nF. The input supply voltage range
is from 1.0V to 1.6V. The device uses a single inductor and a
minimum number of passive components. The typical output
voltage that can be applied to the EL lamp is ±56V.
The HV825 can be enabled/disabled by connecting the RSW-Osc
resistor to VDD/GND.
The HV825 has two internal oscillators, a switching bipolar
junction transistor (BJT), and a high voltage EL lamp driver.
The frequency for the switching BJT is set by an external
resistor connected between the RSW-Osc pin and the VDD
supply pin. The EL lamp driver frequency is set by an external
resistor connected between REL-Osc pin and the VDD pin. An
external inductor is connected between the LX and VDD pins.
A 0.01 to 0.1µF, 100V capacitor is connected between the CS
pin and the GND pin. The EL lamp is connected between the
VA pin and the VB pin.
The switching BJT charges the external inductor and discharges
it into the 0.01 to 0.1µF, 100V capacitor at the CS pin. The volt-
age at the CS pin will start to increase. The outputs VA and VB
are configured as an H-bridge and are switching in opposite
states to achieve a peak-to-peak voltage of two times the VCS
voltage across the EL lamp.
LX
CS
Q
VA
Q
Output
Osc
Q
VB
Q
Share Link: 