ICL7117CPL データシートの表示（PDF） - Intersil
部品番号
コンポーネント説明
メーカー
ICL7117CPL Datasheet PDF : 14 Pages
| |||
ICL7116, ICL7117
Design Information Summary Sheet
• OSCILLATOR FREQUENCY
fOSC = 0.45/RC
COSC > 50pF; ROSC > 50kΩ
fOSC (Typ) = 48kHz
• OSCILLATOR PERIOD
tOSC = RC/0.45
• INTEGRATION CLOCK FREQUENCY
fCLOCK = fOSC/4
• INTEGRATION PERIOD
tINT = 1000 x (4/fOSC)
• 60/50Hz REJECTION CRITERION
tINT/t60Hz or tlNT/t50Hz = Integer
• OPTIMUM INTEGRATION CURRENT
IINT = 4µA
• FULL SCALE ANALOG INPUT VOLTAGE
VlNFS (Typ) = 200mV or 2V
• INTEGRATE RESISTOR
RINT = V----I-I-I-NN----F-T--S--
• INTEGRATE CAPACITOR
CINT = (---t--I--N---V-T---I-)-N-(--I-T-I--N----T----)
• INTEGRATOR OUTPUT VOLTAGE SWING
VINT = (---t--I--N---C-T---I-)-N-(--I--TI--N----T----)
• VINT MAXIMUM SWING:
(V- + 1.0V) < VINT < (V+ - 0.5V), VINT (Typ) = 2V
• DISPLAY COUNT
COUNT = 1000 × V---V--R---I-EN----F-
• CONVERSION CYCLE
tCYC = tCL0CK x 4000
tCYC = tOSC x 16,000
when fOSC = 48KHz; tCYC = 333ms
• COMMON MODE INPUT VOLTAGE
(V- + 1V) < VlN < (V+ - 0.5V)
• AUTO-ZERO CAPACITOR
0.01µF < CAZ < 1µF
• REFERENCE CAPACITOR
0.1µF < CREF < 1µF
• VCOM
Biased between V+ and V-.
• VCOM ≅ V+ - 2.8V
Regulation lost when V+ to V- < ≅6.8V.
If VCOM is externally pulled down to (V + to V -)/2,
the VCOM circuit will turn off.
• ICL7116 POWER SUPPLY: SINGLE 9V
V+ - V- = 9V
Digital supply is generated internally
VTEST ≅ V+ - 4.5V
• ICL7116 DISPLAY: LCD
Type: Direct drive with digital logic supply amplitude.
• ICL7117 POWER SUPPLY: DUAL ±5.0V
V+ = +5V to GND
V- = -5V to GND
Digital Logic and LED driver supply V+ to GND
• ICL7117 DISPLAY: LED
Type: Non-Multiplexed Common Anode
Typical Integrator Amplifier Output Waveform (INT Pin)
AUTO ZERO PHASE
(COUNTS)
2999 - 1000
SIGNAL INTEGRATE
PHASE FIXED
1000 COUNTS
DE-INTEGRATE PHASE
0 - 1999 COUNTS
TOTAL CONVERSION TIME = 4000 x tCLOCK = 16,000 x tOSC
4
Share Link: 