ICS810001-21 データシートの表示（PDF） - Integrated Device Technology
部品番号
コンポーネント説明
メーカー
ICS810001-21 Datasheet PDF : 19 Pages
| |||
ICS810001-21 Data Sheet
FEMTOCLOCK™ DUAL VCXO VIDEO PLL
Table 3D. CLK_SEL Function Table
Input
CLK_SEL Operation
0 (default) Selects CLK0 as PLL reference input.
1
Selects CLK1 as PLL reference input.
Table 3E. MR Master Reset Function Table
Input
MR
Operation
0 (default) Normal operation, internal dividers and the output Q are enabled.
1
Internal dividers are reset. Q output is in logic low state (with OE = 1).
Table 3F. FemtoCLock PLL Feedback Divider Function Table
Input
MF
Operation
0 (default) Selects MF = 22. The 2nd stage PLL (FemtoClock. multiplies the output frequency of the VCXO-PLL by 22.
1
Selects MF = 24. The 2nd stage PLL (FemtoClock. multiplies the output frequency of the VCXO-PLL by 24.
Table 3G. PLL Output Divider Function Table
Input
N1
N0
Operation
0 (default)
0 (default) Output divider N = 4.
0
1
Output divider N = 8.
1
0
Output divider N = 12.
1
1
Output divider N = 18.
Table 3H. PLL BYPASS Logic Function Table
Input
nBP1
nBP0
Operation
0
0
1
1 (default)
0
1
0
1 (default)
VCXO-PLL mode: The input reference frequency is divided by the pre-divider P and is multiplied by the
VCXO-PLL. fOUT = (fREF ÷ P) * M.
Test mode: The input reference frequency is divided by the pre-divider P and the output divider N and
bypasses both PLLs. fOUT = fREF ÷ (P * N).
FemtoClock Mode: The input reference frequency is divided by the pre-divider P multiplied by the 2nd PLL
(FemtoClock, MF). The 1st PLL (VCXO-PLL, M) is bypassed. This mode does not support jitter
attenuatiion. fOUT = (fREF ÷ P) * MF ÷ N.
Dual PLL Mode: both PLLs are cascaded for jitter attenuation and frequency multiplication.
fOUT = (fREF ÷ P) * M * MF ÷ N.
ICS810001DK-21 REVISION B APRIL 13, 2010
6
©2010 Integrated Device Technology, Inc.
Share Link: 