ICX227AL
Diagonal 4.5mm (Type 1/4) CCD Image Sensor for CCIR B/W Video Cameras
Description
The ICX227AL is an interline CCD solid-state
image sensor suitable for CCIR B/W video cameras.
Compared with the current product ICX207AL, smear
charactristics are improved drastically and power
consumption is reduced. High sensitivity and high
saturation signal are achieved by Super HAD CCD
technology.
This chip features a field period readout system and
an electronic shutter with variable charge-storage
time.
The package is a 10mm-square 14-pin DIP (Plastic).
Features
• Low smear (–105dB Typ. at F5.6)
• Low power consumption
(–34% compared with ICX207AL)
• High sensitivity
(+2.5dB at F1.2 compared with ICX207AL)
• High saturation signal
• Supply voltage
12V
• Horizontal register: 3.3V drive
• Reset gate:
3.3V drive
• No voltage adjustment
(Reset gate and substrate bias are not adjusted.)
• Low dark current
• Excellent antiblooming characteristics
• Continuous variable-speed shutter
• Recommended range of exit pupil distance: –20 to –100mm
14 pin DIP (Plastic)
Pin 1
1
V
14
7
H
30
Pin 8
Optical black position
(Top View)
Device Structure
• Interline CCD image sensor
• Image size:
• Number of effective pixels:
• Total number of pixels:
• Chip size:
• Unit cell size:
• Optical black:
• Number of dummy bits:
• Substrate material:
Diagonal 4.5mm (Type 1/4)
500 (H) × 582 (V) approx. 290K pixels
537 (H) × 597 (V) approx. 320K pixels
4.34mm (H) × 3.69mm (V)
7.3µm (H) × 4.7µm (V)
Horizontal (H) direction: Front 7 pixels, rear 30 pixels
Vertical (V) direction: Front 14 pixels, rear 1 pixel
Horizontal 16
Vertical 1 (even fields only)
Silicon
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E00328