IDT54FCT377ATEB データシートの表示（PDF） - Integrated Device Technology
部品番号
コンポーネント説明
メーカー
IDT54FCT377ATEB Datasheet PDF : 7 Pages
| |||
IDT54/74FCT377T/AT/CT/DT
FAST CMOS OCTAL D FLIP-FLOP WITH CLOCK ENABLE
MILITARY AND COMMERCIAL TEMPERATURE RANGES
POWER SUPPLY CHARACTERISTICS
Symbol
Parameter
Test Conditions(1)
∆ICC
Quiescent Power Supply
Current TTL Inputs HIGH
VCC = Max.
VIN = 3.4V(3)
ICCD
Dynamic Power Supply
Current(4)
VCC = Max., Outputs Open
CE = GND
One Input Toggling
50% Duty Cycle
IC
Total Power Supply
Current(6)
VCC = Max., Outputs Open
fCP = 10MHz
CE = GND
One Bit Toggling
fi = 5MHz
50% Duty Cycle
VCC = Max., Outputs Open
fCP = 10MHz, 50% Duty Cycle
CE = GND
Eight Bits Toggling
fi = 2.5MHz
50% Duty Cycle
VIN = VCC
VIN = GND
VIN = VCC
VIN = GND
VIN = 3.4V
VIN = GND
VIN = VCC
VIN = GND
VIN = 3.4V
VIN = GND
Min.
—
—
—
—
—
—
Typ.(2)
0.5
Max.
2.0
0.15
0.25
1.5
3.5
2.0
5.5
3.8
7.3(5)
6.0
16.3(5)
NOTES:
1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 5.0V, +25°C ambient.
3. Per TTL driven input (VIN = 3.4V). All other inputs at VCC or GND.
4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations.
5. Values for these conditions are examples of the ICC formula. These limits are guaranteed but not tested.
6. IC = IQUIESCENT + IINPUTS + IDYNAMIC
IC = ICC + ∆ICC DHNT + ICCD (fCP/2 + fiNi)
ICC = Quiescent Current
∆ICC = Power Supply Current for a TTL High Input (VIN = 3.4V)
DH = Duty Cycle for TTL Inputs High
NT = Number of TTL Inputs at DH
ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL)
fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices)
fi = Input Frequency
Ni = Number of Inputs at fi
All currents are in milliamps and all frequencies are in megahertz.
Unit
mA
mA/
MHz
mA
2639 tbl 05
6.14
4
Share Link: 