DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

IP1000A データシートの表示(PDF) - Unspecified

部品番号
コンポーネント説明
メーカー
IP1000A Datasheet PDF : 75 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
Figure 2-3 : Example Magic Packet
Received Packet
0xFFFFFFFFFFFF
0x112233445566
0x112233445566
0x112233445566
0x112233445566
0x112233445566
0x112233445566
0x112233445566
0x112233445566
0x112233445566
0x112233445566
0x112233445566
0x112233445566
0x112233445566
0x112233445566
0x112233445566
0x112233445566
IP1000A LF
Preliminary Data Sheet
Magic Packet wake up is controlled by the MagicPktEnable bit in the WakeEvent register. A wake event
can only take place in the D1, D2, or D3 states, and the MagicPktEnable bit has no effect when the
IP1000A LF is in the D0 power state. The Magic Packet must also pass the address matching criteria set
in ReceiveMode register. A Magic Packet may also be a broadcast frame. When the IP1000A LF detects
a Magic Packet, it signals a wake event on PMEN (if PMEN assertion is enabled), and sets the
MagicPktEvent bit in the WakeEvent register.
The IP1000A LF can also signal a wake event when it senses a change in the network link state, from
“link up” to “link fail”, or vice versa. Link state wake is controlled by the LinkEventEnable bit in the
WakeEvent register.
At the time LinkEventEnable bit is set by the host system, the IP1000A LF samples the current link state.
It then waits for the link state to change. If the link state changes before the IP1000A LF returns to state
D0 or the LinkEventEnable bit is cleared, the LinkEvent bit is set in the WakeEvent register, and (if it is
enabled) the PMEN signal is asserted.
2.3 Media Access Control
The MAC block implements the IEEE Ethernet 802.3 Media Access Control functions with Full Duplex
and Flow Control enhancements. In half duplex mode, the MAC implements the Carrier Sense Multiple
Access with Collision Detect (CSMA/CD) protocol. Full duplex mode by definition does not utilize
CSMA/CD, allowing data to be transmitted on demand. An optional flow control mechanism in full duplex
mode is provided via the MAC Control PAUSE function. Additionally, the MAC also performs these
functions in either half or full duplex mode:
Optional transmit frame check sequence (FCS) generation
Padding to the minimum legal frame size
Copyright © 2005, IC Plus Corp.
19/75
July 5, 2005
IP1000A LF-DS-R08

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]