IRHM7064 データシートの表示（PDF） - International Rectifier
部品番号
コンポーネント説明
メーカー
IRHM7064 Datasheet PDF : 8 Pages
| |||
IRHM7064, JANSR2N7431
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Pre-Irradiation
Parameter
Min Typ Max Units
BVDSS
Drain-to-Source Breakdown Voltage 60 — — V
∆BVDSS/∆TJ Temperature Coefficient of Breakdown — 0.056 — V/°C
Voltage
RDS(on)
Static Drain-to-Source On-State
Resistance
— — 0.021 Ω
VGS(th)
gfs
IDSS
Gate Threshold Voltage
Forward Transconductance
Zero Gate Voltage Drain Current
2.0 — 4.0 V
18 — — S
—
—
—
—
25
250
µA
IGSS
IGSS
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
— — 100
—
— -100 nA
— — 270
— — 60 nC
— — 110
— — 27
— — 120
—
— 120 ns
— — 100
Test Conditions
VGS = 0V, ID = 1.0mA
Reference to 25°C, ID = 1.0mA
VGS = 12V, ID = 35A Ã
VDS = VGS, ID = 1.0mA
VDS ≥15V, IDS = 35A Ã
VDS = 48V ,VGS = 0V
VDS = 48V,
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS =12V, ID = 35A
VDS = 30V
VDD = 30V, ID = 35A
VGS =12V, RG = 2.35Ω
LS + LD
Total Inductance
Measured from Drain lead (6mm /0.25in
from package) to Source lead (6mm /0.25in.
— 6.8 — nH
from package) with Source wires internally
bonded from Source Pin to Drain Pad
Ciss
Coss
Crss
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
— 4900 —
— 2800 — pF
— 860 —
VGS = 0V, VDS = 25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
Test Conditions
IS Continuous Source Current (Body Diode)
ISM Pulse Source Current (Body Diode) À
—
—
—
—
35*
140
A
VSD Diode Forward Voltage
— — 1.5 V
trr Reverse Recovery Time
— — 360 ns
QRR Reverse Recovery Charge
— — 3.1 µC
Tj = 25°C, IS = 35A, VGS = 0V Ã
Tj = 25°C, IF = 35A, di/dt ≤ 100A/µs
VDD ≤ 50V Ã
ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
*Current is limited by package
Thermal Resistance
Parameter
Min Typ Max Units
Test Conditions
RthJC
RthJA
RthCS
Junction-to-Case
Junction-to-Ambient
Case-to-Sink
— — 0.50
— — 48
— 0.21 —
°C/W
Typical socket mount
Note: Corresponding Spice and Saber models are available on International Rectifier Website.
For footnotes refer to the last page
2
www.irf.com
Share Link: 