ISP1109 データシートの表示（PDF） - Philips Electronics

部品番号

コンポーネント説明

メーカー

ISP1109

Universal Serial Bus transceiver with carkit support

Philips Electronics 

ISP1109

Universal Serial Bus transceiver with carkit support

Rev. 01 — 14 July 2005

Product data sheet

1. General description

The ISP1109 is a Universal Serial Bus (USB) transceiver device that supports

CEA−936−A, Mini-USB Analog Carkit Interface. It is fully compliant with Universal Serial

Bus Specification Rev. 2.0. The ISP1109 can transmit and receive serial data at full-speed

(12 Mbit/s) and low-speed (1.5 Mbit/s) data rates.

The ISP1109 is available in HVQFN32 package.

2. Features

s Fully complies with Universal Serial Bus Specification Rev. 2.0

s Supports CEA−936−A, Mini-USB Analog Carkit Interface

s Can transmit and receive serial data at full-speed (12 Mbit/s) and low-speed

(1.5 Mbit/s) data rates

s Supports Serial Parallel Interface (SPI) (up to 26 MHz) and I2C-bus (up to 400 kHz)

serial interface to access control and status registers

s Supports Universal Asynchronous Receiver-Transmitter (UART) pass-through on the

DP and DM lines

s Built-in analog switches to support analog audio signals multiplexed on the DP and DM

lines

s Supports On-The-Go (OTG) Session Request Protocol (SRP)

s Supports Power-down mode, in which the whole chip consumes less than 20 µA

power current

s 3.0 V to 5.25 V power supply input range (VCC)

s Supports wide range digital interfacing I/O voltage (VCC(I/O)) of 1.65 V to 3.6 V

s ±12 kV ESD protection at pins DP, DM, ID, VBUS, VCC, GNDA and GNDD

s Supports charger current switching (ISET) detection

s Full industrial grade operation from −40 °C to +85 °C

s Available in a small HVQFN32 (5 x 5 mm2) halogen-free and lead-free package.

3. Applications

s Mobile phones.

Share Link: