KYL-300L データシートの表示（PDF） - SHENZHEN KYL COMMUNICATION EQUIPMENT CO,LTD.

部品番号

コンポーネント説明

メーカー

KYL-300L

Low Power Wireless Transceiver Data Module

SHENZHEN KYL COMMUNICATION EQUIPMENT CO,LTD. 

Shenzhen KYL Communication Equipment Co., Ltd

4. Setting of channel, interface, and data format

Before using KYL-300L, the user needs to make simple configuration to

determine the channel, interface mode and data format based on his own needs.

You can view or change the module's interface baud rate, channel and address

code, parameter setting or reading as per the testing software KYLCOM in the PC

(in products box). And the configuration is as follows:

i. Channel configuration:

Channel No. Frequency

Channel No.

Frequency

1

429.0325MHZ 5

433.0325MHZ

2

430.0325MHZ 6

434.0325MHZ

3

431.0325MHZ 7

435.0325MHZ

4

432.0325MHZ 8

436.0325MHZ

Note: the frequency points corresponding to each channel can be adjusted

based on the user’s needs.

ii. The schematic diagram of setting the parameter as follows:

a. Connect the PC and module with RS232 data cable.

b. Open the “KYLCOM” PC software, then select “English” as follows:

Fax: +86-755-83408785

www.rf-data.com

6

Share Link: