KYL-600L データシートの表示（PDF） - SHENZHEN KYL COMMUNICATION EQUIPMENT CO,LTD.

部品番号

コンポーネント説明

メーカー

KYL-600L

Wireless audio and Data Radio Module User Manual

SHENZHEN KYL COMMUNICATION EQUIPMENT CO,LTD. 

Shenzhen KYL Communication Equipment Co., Ltd

8. Notices during the use of KYL-600L

1) The antenna should away from the power supply if use the switch

power, because the transmitting of the antenna may affect the normal

work of the switch power. When the transmission happen fault,

checking the power voltage whether interfered from the antenna is

one way of eliminating fault.

2) Use the min. grain wave and high anti-jamming switch power or

batteries

3) The power capacity must meet D.C. 5~12V, more than 800mA

output current

4) The space between the experiment Radio should be more than 5m.

The antenna should span on the high to increase the distance of

electric wave. It is important for using shortwave communication

equipment in the city.

5) After connecting the antenna to the Radio, the space between the

Radios should more than 10m, so avoiding signal backup.

6) The antenna plywood should nip in the connection inside the

antenna, but not nip the antenna projectile, so avoiding the

performance of the antenna.

7) High frequency cable don’t come down directness, circle a circuit

and fixup it on the frame for the best.

9. Standard configuration and Antenna configuration

i: Standard configuration:

* One KYL-600L RF module

* A 9pin flat Connection Line

* A whip antenna（about 10cm）

ii: Antenna configuration:

Many appropriative antennas for low power RF modules are selected

for meeting different user antenna configuration. Please ask our Sales

office for further information about the antenna’s dimension and

performance. The main options of antennas are exterior flagelliform

rubber antenna with helical SMA joint, small osculum antenna, small

rod antenna and elbow antenna. If the user has special demands on

Fax: +86-0755-83408785 kyl03losia@gmail.com www.rf-data.com

Share Link: