LF505-S データシートの表示（PDF） - LEM Industrial
部品番号
コンポーネント説明
メーカー
LF505-S Datasheet PDF : 3 Pages
| |||
Current Transducer LF 505-S
Isolation characteristics
Vd R.m.s. voltage for AC isolation test, 50 Hz, 1 mn
3.8
kV
Vw
Impulse withstand voltage 1.2/50 µs
12.5
kV
dCp Creepage distance
dCl Clearance distance
CTI Comparative Tracking Index (Group IIIa)
Min
15.2
mm
14.5
mm
175
Application examples
According to EN 50178 and CEI 61010-1 standards and following conditions :
• Over voltage category OV 3
• Pollution degree PD2
• Non-uniform field
dCp, dCI, VW
Single isolation
Reinforced isolation
EN 50178
Rated isolation voltage
1250 V
690 V
CEI 61010-1
Nominal voltage
1250 V rms
690 V rms
Safety
This transducer must be used in electric/electronic equipment with respect to
applicable standards and safety requirements in accordance with the following
manufacturer's operating instructions.
Caution, risk of electrical shock
When operating the transducer, certain parts of the module can carry hazardous
voltage (eg. primary busbar, power supply).
Ignoring this warning can lead to injury and/or cause serious damage.
This transducer is a built-in device, whose conducting parts must be inaccessible
after installation.
A protective housing or additional shield could be used.
Main supply must be able to be disconnected.
060922/9
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice.
page 2/3
www.lem.com
Share Link: 