M27C800-50XB6 データシートの表示（PDF） - STMicroelectronics
部品番号
コンポーネント説明
メーカー
M27C800-50XB6 Datasheet PDF : 17 Pages
| |||
Table 6. Capacitance (1) (TA = 25 °C, f = 1 MHz)
Symbol
Parameter
Input Capacitance (except BYTEVPP)
CIN
Input Capacitance (BYTEVPP)
COUT Output Capacitance
Note: 1. Sampled only, not 100% tested.
Test Condit ion
VIN = 0V
VIN = 0V
VOUT = 0V
M27C800
Min
Max
Unit
10
pF
120
pF
12
pF
Table 7. Read Mode DC Characteristics (1)
(TA = 0 to 70 °C or –40 to 85 °C; VCC = 5V ± 5% or 5V ± 10%; VPP = VCC)
Symbol
Parameter
Test Condition
Min
ILI
Input Leakage Current
ILO Output Leakage Current
0V ≤ VIN ≤ VCC
0V ≤ VOUT ≤ VCC
ICC Supply Current
ICC1 Supply Current (Standby) TTL
ICC2 Supply Current (Standby) CMOS
IPP Program Current
E = VIL, G = VIL,
IOUT = 0mA, f = 8MHz
E = VIL, G = VIL,
IOUT = 0mA, f = 5MHz
E = VIH
E > VCC – 0.2V
VPP = VCC
VIL
Input Low Voltage
–0.3
VIH (2) Input High Voltage
2
VOL Output Low Voltage
IOL = 2.1mA
VOH Output High Voltage TTL
IOH = –400µA
2.4
Note: 1. VCC must be applied simultaneously with or before VPP and removed simultaneously or after VPP.
2. Maximum DC voltage on Output is VCC + 0.5V.
Max
Unit
±1
µA
±10
µA
70
mA
50
mA
1
mA
50
µA
10
µA
0.8
V
VCC + 1
V
0.4
V
V
Standby Mode
The M27C800 has a standby mode which reduces
the supply current from 50mA to 100µA. The
M27C800 is placed in the standby mode by apply-
ing a CMOS high signal to the E input. When in the
standby mode, the outputs are in a high imped-
ance state, independent of the G input.
5/17
Share Link: 