M65582AMF-XXXFP データシートの表示（PDF） - Renesas Electronics
部品番号
コンポーネント説明
メーカー
M65582AMF-XXXFP Datasheet PDF : 46 Pages
| |||
M65582AMF-XXXFP
Limits
Parameter
Symbol
Min.
Typ.
Max.
Unit
Low average output current (See note 2)
P00-P07, P10, P15, P16, P20-P27, P40-P45
IOL1(MCU)
2
mA
Low average output current (See note 2)
P11-P14
IOL2(MCU)
6
mA
Low average output current (See note 3)
P24-P27
IOL3(MCU)
10
mA
Oscillation frequency (for CPU operation) X IN f(XIN) (MCU) 7.9
8.0
8.1
MHz
(See note 5)
Oscillation frequency (for sub-clock operation) f(XCIN) (MCU) 29
32
35
kHz
X CIN
Input frequency TIM2, TIM3, INT1, INT2, INT3 fhs1 (MCU)
100
kHz
Input frequency S CLK
fhs2 (MCU)
1
MHz
Input frequency SCL1, SCL2
fhs3 (MCU)
400
kHz
Input amplitude video signal CV IN
VI (MCU)
1.5
2.0
2.5
V
Note 1: The total current that flows out the MCU must be 20mA or less.
2: The total input current to MCU (IOL1+IOL2) must be 30mA or less.
3: The total average input current for ports P24-P27 to MCU must be 20mA or less.
4: Connect 0.1µF or more capacitor externally between the power source pins VDD-VSS so as to reduce power
source noise.
5: Use a quartz-crystal oscillator or a ceramic resonator for the CPU oscillator circuit. When using the data
slicer, use 8MHz.
6: P06, P07, P23-P25 have the hysteresis when these pins are used as interrupt input pins or timer pins.
P11-P14 have the hysteresis when these pins are used as multi-master I2C-Bus interface ports.
P20-P22 have the hysteresis when these pins are used as serial I/O pins.
7: Pin name in each parameter is described pin names.
(1) Dedicated pins: dedicated pin name.
(2) Double-/Triple-function ports.
When the same limits: I/O port name.
When the limits of function except ports are different from I/O port limits: function pin name.
Rev.1.0, Sep.19.2003, page 6 of 45
Share Link: 