MAX4664CSE データシートの表示（PDF） - Maxim Integrated
部品番号
コンポーネント説明
メーカー
MAX4664CSE Datasheet PDF : 12 Pages
| |||
5Ω, Quad, SPST,
CMOS Analog Switches
ABSOLUTE MAXIMUM RATINGS
V+ to GND ..............................................................-0.3V to +44V
V- to GND ..............................................................+0.3V to -44V
V+ to V-...................................................................-0.3V to +44V
VL to GND ........................................(GND - 0.3V) to (V+ + 0.3V)
All Other Pins to DGND (Note 1) ......... (V- - 0.3V) to (V+ + 0.3V)
Continuous Current (COM_, NO_, NC_) ........................±100mA
Peak Current (COM_, NO_, NC_)
(pulsed at 1ms, 10% duty cycle)............................... ±300mA
Continuous Power Dissipation (TA = +70°C)
Narrow SO (derate 8.70mW/°C above +70°C) ...............696mW
Plastic DIP (derate 10.53mW/°C above +70°C)..............842mW
Operating Temperature Ranges
MAX466_C_E ......................................................0°C to +70°C
MAX466_E_E ....................................................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Note 1: Signals on NC_, NO_, COM_, or IN_ exceeding V+ or V- are clamped by internal diodes. Limit forward-diode current to
maximum current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Dual Supplies
(V+ = +15V, V- = -15V, VL = +5V, VIN_H = +2.4V, VIN_L = +0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA = +25°C.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
ANALOG SWITCH
Input Voltage Range
(Note 3)
VCOM_, VNO_,
VNC_
V-
V+
V
COM_ to NO_ or NC_
On-Resistance
RON
ICOM_ = 10mA,
TA = +25°C
VNO_ or VNC_ = ±10V TA = TMIN to TMAX
3
4
Ω
5
COM_ to NO_ or NC_
On-Resistance Match Between
Channels (Notes 3, 4)
∆RON
ICOM_ = 10mA,
VNO_ or VNC_= ±10V
TA = +25°C
TA = TMIN to TMAX
0.2
0.5
Ω
0.7
COM_ to NO_ or NC_
On-Resistance Flatness
(Notes 3, 5)
RFLAT(ON)
ICOM_ = 10mA; VNO_ TA = +25°C
or VNC_ = -5V, 0, 5V TA = TMIN to TMAX
0.2
0.5
Ω
0.6
Off-Leakage Current
(NO_ or NC_) (Note 6)
COM_ Off-Leakage Current
(Note 6)
INO_, INC_
VCOM_ = ±10V,
TA = +25°C
VNO_ or VNC_ = +– 10V TA = TMIN to TMAX
-0.5
-5
0.01
0.5
5
nA
ICOM_(OFF)
VCOM_ = ±10V,
TA = +25°C
VNO_ or VNC_ = +– 10V TA = TMIN to TMAX
-0.5
-5
0.01
0.5
5
nA
COM_ On-Leakage Current
(Note 6)
VCOM_ = ±10V,
TA = +25°C
-1
0.02
1
ICOM_(ON) VNO_ or VNC_= ±10V
nA
or floating
TA = TMIN to TMAX -10
10
LOGIC INPUT
Input Current with Input Voltage
High
IIN_H
IN_ = 2.4V, all others = 0.8V
-0.500 0.001 0.500 µA
Input Current with Input Voltage
Low
Logic Input Voltage High
Logic Input Voltage Low
IIN_L
VIN_H
VIN_L
IN_ = 0.8V, all others = 2.4V
-0.500 0.001 0.500 µA
2.4
V
0.8
V
2 _______________________________________________________________________________________
Share Link: 