MASWSS0201SMB データシートの表示（PDF） - M/A-COM Technology Solutions, Inc.

部品番号

コンポーネント説明

メーカー

MASWSS0201SMB

GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz

M/A-COM Technology Solutions, Inc. 

MASWSS0201

GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch

DC - 2.5 GHz

Lead-Free 3 mm 12-lead PQFN†

Rev. V1

†

Reference Application Note M538 for lead-free solder reflow recommendations.

Meets JEDEC moisture sensitivity level 1 requirements.

Application Schematic 11,12

C1-C5=10000 pf

C6=100 pf

11. Non-connected pins (P1 and P5) are shown connected to

ground as recommended. All data on this datasheet was

taken with N/C pins connected to ground.

12. Application schematic shown is for terminated

configuration. For non-terminated operation Term 1 and

Term 2 ground pins are left open. See application section

for data in unterminated configuration.

Qualification

Qualified to M/A-COM specification REL-201,

Process Flow –2.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

M/A-COM’s AN3007 Application Note outlines a

method for ESD sensitivity mitigation. It can be

found at the Tech/Apps section of the

MACOM.COM website.

4

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Share Link: