SY100E111L(1998) データシートの表示（PDF） - Micrel
部品番号
コンポーネント説明
メーカー
SY100E111L Datasheet PDF : 5 Pages
| |||
Micrel
ClockWorks™
SY10E111A/L
SY100E111A/L
AC ELECTRICAL CHARACTERISTICS
VEE = VEE (Min.) to VEE (Max.); VCC = GND
TA = -40°C
TA = 0°C
TA = +25°C
TA = +85°C
Symbol
Parameter
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit
tPLH
tPHL
tskew
Propagation Delay to Output
IN (differential)(2)
IN (single-ended)(3)
Within-Device Skew(4)
Part-to-Part Skew (Diff.)
ps
380 — 680 430 — 630 430 — 630 430 — 630
280 — 780 330 — 730 330 — 730 330 — 730
— — 75 — — 50 — — 50 — — 50 ps
— — 250 — — 200 — — 200 — — 200
VPP
VCMR
Minimum Input Swing(5)
Common Mode Range(6)
250 — — 250 — — 250 — — 250 — — mV
–1.5 — –0.4 –1.5 — –0.4 –1.5 — –0.4 –1.5 — –0.4 V
tr
Rise/Fall Times
tf
20% to 80%
200 — 650 200 — 600 200 — 600 200 — 600 ps
NOTES:
1. Parametric values specified at:
5 volt Power Supply Range 100E111A Series: -4.2V to -5.5V.
10E111A Series
-4.75V to -5.5V.
3 volt Power Supply Range 10/100E111L Series: -3.0V to -3.8V.
2. The differential propagation delay is defined as the delay from the crossing points of the differential input signals to the crossing point of the
differential output signals.
3. The single-ended propagation delay is defined as the delay from the 50% point of the input signal to the 50% point of the output signal.
4. The within-device skew is defined as the worst case difference between any two similar delay paths within a single device.
5. VPP (min) is defined as the minimum input differential voltage which will cause no increase in the propagation delay. The VPP (min) is AC limited for
the E111A/L as a differential input as low as 50mV will still produce full ECL levels at the output.
6. VCMR is defined as the range within the VIH level may vary, with the device still meeting the propagation delay specification. The VIL level must be
such that the peak-to-peak voltage is less than 1.0V and greater than or equal to VPP (min).
For PECL operation: VCMR (max) = VCC – |VCMR (max)| and
VCMR (min) = VCC – |VCMR (min)|
PRODUCT ORDERING CODE
5V
Ordering
Code
SY10E111AJC
SY10E111AJCTR
SY100E111AJC
SY100E111AJCTR
Package
Type
J28-1
J28-1
J28-1
J28-1
Operating
Range
Commercial
Commercial
Commercial
Commercial
VEE Range
(V)
-4.75 to -5.5
-4.75 to -5.5
-4.2 to -5.5
-4.2 to -5.5
3.3V
SY10E111LJC
SY10E111LJCTR
SY100E111LJC
SY100E111LJCTR
J28-1
J28-1
J28-1
J28-1
Commercial
Commercial
Commercial
Commercial
-3.0 to -3.8
-3.0 to -3.8
-3.0 to -3.8
-3.0 to -3.8
5V
Ordering
Code
SY10E111AJI
SY10E111AJITR
SY100E111AJI
SY100E111AJITR
Package
Type
J28-1
J28-1
J28-1
J28-1
Operating
Range
Industrial
Industrial
Industrial
Industrial
VEE Range
(V)
-4.75 to -5.5
-4.75 to -5.5
-4.2 to -5.5
-4.2 to -5.5
3.3V
SY10E111LJI
SY10E111LJITR
SY100E111LJI
SY100E111LJITR
J28-1
J28-1
J28-1
J28-1
Industrial
Industrial
Industrial
Industrial
-3.0 to -3.8
-3.0 to -3.8
-3.0 to -3.8
-3.0 to -3.8
4
Share Link: 