DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MAX15001 データシートの表示(PDF) - Maxim Integrated

部品番号
コンポーネント説明
メーカー
MAX15001 Datasheet PDF : 18 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Current-Mode PWM Controllers with
Programmable Switching Frequency
ELECTRICAL CHARACTERISTICS (continued)
(VIN = +12V (for MAX15000, bring VIN up to 23.6V for startup), 10nF bypass capacitors at IN and VCC, R12 = 15k(MAX1500_A), R12
= 7.5k(MAX1500_B), R15 = 1k, C6 = 100nF (see the Typical Application Circuit), NDRV = open, VUVLO/EN = +1.4V, VFB = +1.0V,
COMP = open, VCS = 0V, TA = -40°C to +85°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX UNITS
OSCILLATOR
Oscillator Frequency Range
Oscillator Frequency Accuracy
NDRV Switching Frequency
(Note 4)
Maximum Duty Cycle
fOSC
fSW
DMAX
fOSC = 200kHz to 800kHz
fOSC = 50kHz to 2500kHz
MAX1500_A, fSW = fOSC/2
MAX1500_B, fSW = fOSC/4
MAX1500_A
MAX1500_B
50
2500
kHz
-10
+10
%
-20
+20
25
625
kHz
12.5
625.0
50
%
75
Note 1: All devices are 100% tested at TA = +85°C. All limits over temperature are guaranteed by characterization.
Note 2: The MAX15000 is intended for use in universal input power supplies. The internal clamp circuit at IN is used to prevent the
bootstrap capacitor (C1 in Figure 1) from charging to a voltage beyond the absolute maximum rating of the device when
UVLO/EN is low (shutdown mode). Externally limit the maximum current to IN (hence to clamp) to 2mA maximum when
UVLO/EN is low. Clamp currents higher than 2mA may result in a clamp voltage higher than 30V, thus exceeding the
absolute maximum rating for IN. For the MAX15001, do not exceed the 24V maximum operating voltage of the device.
Note 3: VREF is measured with FB connected to COMP (see the Functional Diagram).
Note 4: The oscillator in the MAX1500_A is capable of operating up to 2500kHz. However, the NDRV switching frequency is limited
to operate up to 625kHz. Thus, the oscillator frequency for MAX1500_A must be limited to 1250kHz (maximum).
Typical Operating Characteristics
(VUVLO/EN = +1.4V, VFB = +1V, COMP = open, VCS = 0V, TA = +25°C, unless otherwise noted.)
BOOTSTRAP UVLO WAKE-UP LEVEL
vs. TEMPERATURE
21.8
MAX15000 VIN RISING
21.7
21.6
21.5
21.4
21.3
-40 -15
10
35
60
85
TEMPERATURE (°C)
BOOTSTRAP UVLO SHUTDOWN LEVEL
vs. TEMPERATURE
10.3
MAX15000 VIN FALLING
10.1
9.9
9.7
9.5
9.3
-40 -15
10
35
60
85
TEMPERATURE (°C)
UVLO/EN WAKE-UP THRESHOLD
vs. TEMPERATURE
1.236
UVLO/EN RISING
1.234
1.232
1.230
1.228
1.226
1.224
-40 -15
10
35
60
85
TEMPERATURE (°C)
4 _______________________________________________________________________________________

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]