MAX393CSE(1999) データシートの表示（PDF） - Maxim Integrated
部品番号
コンポーネント説明
メーカー
MAX393CSE Datasheet PDF : 12 Pages
| |||
Precision, Quad, SPST Analog Switches
ABSOLUTE MAXIMUM RATINGS
Voltage Referenced to V-
V+ .......................................................................-0.3V to +17V
GND....................................................................-0.3V to +17V
GND..........................................................-0.3V to (V+ + 0.3V)
VIN, VCOM, VNC, VNO (Note 1) ........................................V- to V+
Current (any terminal) .........................................................30mA
Peak Current, COM, NO, NC
(pulsed at 1ms, 10% duty cycle max) ..........................100mA
ESD per Method 3015.7 ..................................................>2000V
Continuous Power Dissipation (TA = +70°C)
Plastic DIP (derate 10.53mW/°C above+70°C) ...........842mW
Narrow SO (derate 8.70mW/°C above +70°C) ............696mW
TSSOP (derate 6.7mW/°C above +70°C) ....................457mW
CERDIP (derate 10.00mW/°C above +70°C) ...............800mW
Operating Temperature Ranges
MAX39_C_ _ .......................................................0°C to +70°C
MAX39_E_ _.....................................................-40°C to +85°C
MAX39_M_ _ ..................................................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Note 1: Signals on NC, NO, COM, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward diode current to maxi-
mum current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Dual Supplies
(V+ = +5V ±10%, V- = -5V ±10%, GND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
ANALOG SWITCH
Analog Signal Range
On-Resistance
SYMBOL
CONDITIONS
VCOM,
VNO,
VNC
RON
(Note 3)
V+ = 4.5V,
V- = -4.5V,
ICOM = -10mA,
VNO or VNC = ±3.5V
TA =
C, E
+25°C
M
TA = TMIN to TMAX
MIN
TYP MAX
(Note 2)
UNITS
V-
V+
V
20
35
20
30
Ω
45
On-Resistance Match Between
Channels (Note 4)
∆RON
V+ = 5V, V- = -5V,
ICOM = -10mA,
VNO or VNC = ±3V
On-Resistance Flatness
(Note 5)
V+ = 5V, V- = -5V,
RFLAT(ON) ICOM = -10mA,
VNO or VNC = ±3V
NO or NC Off Leakage Current
(Note 6)
INO(OFF)
or
INC(OFF)
V+ = 5.5V,
V- = -5.5V,
VCOM = ±4.5V,
VNO or VNC = 4.5V
COM Off Leakage Current
(Note 6)
ICOM(OFF)
V+ = 5.5V,
V- = -5.5V,
VCOM = ±4.5V,
VNO or VNC = 4.5V
COM On Leakage Current
(Note 6)
ICOM(ON)
V+ = 5.5V,
V- = -5.5V,
VCOM = ±4.5V,
VNO or VNC = ±4.5V
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN C, E
to TMAX M
TA = +25°C
TA = TMIN C, E
to TMAX M
TA = +25°C
TA = TMIN C, E
to TMAX M
0.3
2
Ω
4
1
4
Ω
6
-0.1
0.01
0.1
nA
-2.5
2.5
-5
5
-0.1
0.01
0.1
nA
-2.5
2.5
-5
5
-0.2
0.01
0.2
nA
-5.0
5.0
-20
20
2 _______________________________________________________________________________________
Share Link: 