MAX519ACSE データシートの表示（PDF） - Maxim Integrated
部品番号
コンポーネント説明
メーカー
MAX519ACSE Datasheet PDF : 16 Pages
| |||
2-Wire Serial 8-Bit DACs with
Rail-to-Rail Outputs
ABSOLUTE MAXIMUM RATINGS
VDD to GND ..............................................................-0.3V to +6V
OUT_ ..........................................................-0.3V to (VDD + 0.3V)
REF_ (MAX517, MAX519)...........................-0.3V to (VDD + 0.3V)
AD_.............................................................-0.3V to (VDD + 0.3V)
SCL, SDA to GND.....................................................-0.3V to +6V
Maximum Current into Any Pin............................................50mA
Continuous Power Dissipation (TA = +70°C)
8-Pin Plastic DIP (derate 9.09mW/°C above +70°C) ...727mW
8-Pin SO (derate 5.88mW/°C above +70°C)................471mW
8-Pin CERDIP (derate 8.00mW/°C above +70°C)........640mW
16-Pin Plastic DIP (derate 10.53mW/°C above +70°C)..842mW
16-Pin Narrow SO (derate 8.70mW/°C above +70°C) ...696mW
16-Pin CERDIP (derate 10.00mW/°C above +70°C) ......800mW
Operating Temperature Ranges
MAX51_C_ _ .......................................................0°C to +70°C
MAX51_E_ _.....................................................-40°C to +85°C
MAX51_MJB ..................................................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = 5V ±10%, VREF_ = 4V (MAX517, MAX519), RL = 10kΩ, CL = 100pF, TA = TMIN to TMAX, unless otherwise noted.
Typical values are TA = +25°C.)
PARAMETER
STATIC ACCURACY
Resolution
SYMBOL
CONDITIONS
MIN TYP MAX
8
Total Unadjusted Error (Note 1)
TUE
MAX51 _A
MAX51 _B
±1
±1.5
Differential Nonlinearity (Note 1)
Zero-Code Error
DNL
ZCE
Zero-Code-Error Supply Rejection
Zero-Code-Error Temperature Coefficient
Guaranteed monotonic
MAX51 _C
Code = 00 hex
MAX51 _E
MAX51 _BM
MAX51 _C
Code = 00 hex
MAX51 _E
MAX51 _BM
Code = 00 hex
±1
18
20
20
±1
±1
±1
±10
Full-Scale Error
MAX51 _C
±18
Code = FF hex,
MAX518 unloaded
MAX51 _E
±20
MAX51 _BM
±20
Full-Scale-Error Supply Rejection
MAX517, MAX519 MAX51 _C
±1
Code = FF hex
MAX51 _E
±1
VDD = +5V ±10% MAX51 _BM
±1
Full-Scale-Error Temperature Coefficient
Code = FF hex
±10
UNITS
Bits
LSB
LSB
mV
mV
µV/°C
mV
mV
µV/°C
2 _______________________________________________________________________________________
Share Link: 