MB89130 データシートの表示（PDF） - Fujitsu

部品番号

コンポーネント説明

メーカー

MB89130

8-bit Proprietary Microcontroller

Fujitsu 

MB89130/130A Series

s PACKAGE AND CORRESPONDING PRODUCTS

Package

FPT-48P-M13

DIP-48P-M01

MQP-48C-P01

MB89131

×

×

MB89133A

×

MB89135A

×

×

MB89P133A

×

MB89P131

×

×

Package

FPT-48P-M13

DIP-48P-M01

MQP-48C-P01

MB89P135A

×

×

MB89PV130A

×

×

: Available, × : Not available

s DIFFERENCES AMONG PRODUCTS

1. Memory Size

Before evaluating using the OTPROM (one-time PROM) products, verify its differences from the product that

will actually be used. Take particular care on the following points :

• The number of register banks available is different among the MB89131, MB89133A/135A and MB89P135A/

PV130A.

• The stack area, etc., is set at the upper limit of the RAM.

2. Current Consumption

• When operated at low speed, the product with an OTPROM will consume more current than the product with

a mask ROM.

However, the same is current consumption in sleep/stop modes. (For more information, see “s ELECTRICAL

CHARACTERISTICS”.)

• In the case of the MB89PV130A, added is the current consumed by the EPROM which is connected to the

top socket.

3. Mask Options

Functions that can be selected as options and how to designate these options vary with product.

Before using options, check “s MASK OPITONS”.

Take particular care on the following point :

• P40 to P43 must be set to no pull-up resistor when an A/D converter is used.

• For MB89P135A, pull-up resistor option cannot be set for P40 to P43.

• Each option is fixed on the MB89PV130A.

5

Share Link: