MB90F523BPFF データシートの表示（PDF） - Fujitsu

部品番号

コンポーネント説明

メーカー

MB90F523BPFF

16-bit Proprietary Microcontroller

Fujitsu 

MB90520A/520B Series

Pin No.

LQFP-120*1

QFP-120*2

9, 10

11

12

13

14

15

Pin Name

Circuit

Type

Function

P40, P41

PG10,

PG11

P42

SIN0

P43

SOT0

P44

SCK0

P45

SIN1

P46

SOT1

General-purpose I/O ports

Only available when waveform outputs from PG10 and PG11 are disabled.

The settings in the pull-up resistor setup register (RDR4) are enabled

D when ports are set as inputs. The RDR4 settings are ignored when ports

are set as outputs.

Output pins for 8/16-bit PPG timer 1

Only available when waveform output is enabled for PG10 and PG11.

General-purpose I/O port

The settings in the pull-up resistor setup register (RDR4) are enabled

when ports are set as inputs. The RDR4 settings are ignored when ports

are set as outputs.

D

UART (SCI) serial data input pin

Input operates continuously when the UART is performing input.

Accordingly, output to the pin from other functions that share this pin must

be suspended unless performed intentionally.

General-purpose I/O port

The settings in the pull-up resistor setup register (RDR4) are enabled

when ports are set as inputs. The RDR4 settings are ignored when ports

D are set as outputs.

UART (SCI) serial data output pin

Only available when serial data output is enabled for the UART (SCI) .

General-purpose I/O port

The settings in the pull-up resistor setup register (RDR4) are enabled

when ports are set as inputs. The RDR4 settings are ignored when ports

D are set as outputs.

UART (SCI) serial clock input/output pin

Only available when serial clock output is enabled for the UART (SCI) .

General-purpose I/O port

The settings in the pull-up resistor setup register (RDR4) are enabled

when ports set as inputs. The RDR4 settings are ignored when ports set

are as outputs.

D

Data input pin for extended I/O serial interface 1

Input operates continuously when the performing serial input. Accordingly,

output to the pin from other functions that share this pin must be

suspended unless performed intentionally.

General-purpose I/O port

The settings in the pull-up resistor setup register (RDR4) are enabled

when ports set as inputs. The RDR4 settings are ignored when ports are

D set as outputs.

Data output pin for extended I/O serial interface 1

Only available when serial data output is enabled for SOT1.

*1 : FPT-120P-M05

*2 : FPT-120P-M13

10

(Continued)

Share Link: