MB90561 データシートの表示（PDF） - Fujitsu
部品番号
コンポーネント説明
メーカー
MB90561 Datasheet PDF : 91 Pages
| |||
MB90560/565 Series
Pin No.
QFPM06 LQFPM09
SDIP
Pin
Name
Cir- State/
cuit Function
Type* at Reset
Description
P30 to
P35
I/O ports
51 to 56 50 to 55 58 to 63 RTO0 E
to
RTO5
Event output pins for the output compare and wave-
form generator output pins. The pins output the
specified waveform generated by the waveform
generator. If not using waveform generation, these
terminals enable output compare event output to
use as output compare outputs. When used as a
port, set the corresponding bits in the analog input
enable register (ADER) to “port”.
P36
I/O port
Serial data input pin for UART ch0.
59
58
2
D
SIN0
This pin is used continuously when input operation
Port is enabled for UART ch0. In this case, do not use as
inputs a general input pin.
(Hi-Z)
P37
I/O port
60
59
3
D
SOT0
Serial data output pin for UART ch0.
Output operates when UART ch0 output is enabled.
P40
I/O port
61
60
4
D
SCK0
Serial clock I/O pin for UART ch0.
Output operates when UART ch0 clock output is
enabled.
P41 to
P46
62 to 64,
1 to 3
61 to 64,
1, 2
5 to 10
PPG0
D
to
PPG5
I/O ports
Output pins for PPG ch0 to ch5.
The outputs operate when output is enabled for
PPG ch0 to ch5.
P50 to
P57
4 to 11 3 to 10 11 to 18
F
AN0 to
AN7
Analog
inputs
I/O ports
Analog input pins for the A/D converter. Input is
available when the corresponding analog input en-
able register bits are set. (ADER : bit0 to bit7)
Power
12
11
19
AVCC
supply VCC power supply input pin for A/D converter.
input
13
12
20
AVR
G
Refer-
ence volt-
age input
Reference voltage input pin for A/D converter.
Ensure that the voltage does not exceed VCC.
Power
14
13
21
AVSS
supply VSS power supply input pin for A/D converter.
input
* : See “s I/O CIRCUITS” for details of the circuit types.
(Continued)
11
Share Link: 