MB90560 データシートの表示（PDF） - Fujitsu
部品番号
コンポーネント説明
メーカー
MB90560 Datasheet PDF : 92 Pages
| |||
MB90560/565 Series
■ PIN DESCRIOTIONS
QFP*3
Pin No.
LQFP*4
SDIP*5
Pin
Name
Circuit
Type*1
State/
Function
at Reset
Description
23, 24
22, 23 30, 31 X0, X1 A
Oscillator
Connect oscillator to these pins.
If using an external clock, leave X1 open.
20
19
27 RST H
Reset
input
External reset input pin
26 to 33
25 to 32
33 to 40
P00 to
P07
C
I/O ports
P10 to
P16
I/O ports
34 to 40 33 to 39 41 to 47
C
INT0 to
INT6
Can be used as interrupt request inputs ch0 to ch6.
In standby mode, these pins can operate as inputs
by setting the bits corresponding to EN0 to EN6 to
“1” and setting as input ports. When used as a port,
set the corresponding bits in the analog input
enable register (ADER) to “port”.
P17
I/O port
External clock input pin for the freerun timer.
41
40
48
C
FRCK
This pin can be used as an input when set as the
clock input for the freerun timer and set as an input
port. When used as a port, set the corresponding
bit in the analog input enable register (ADER) to
“port”.
P20
Port I/O port
inputs
42
41
49
D
(Hi-Z External clock input pin for reload timer ch0. This
TIN0
outputs) pin can be used as an input when set as the exter-
nal clock input and set as an input port.
P21
43
42
50
D
TO0
I/O port
Event output pin for reload timer ch0. Output oper-
ates when event output is enabled.
P22
I/O port
44
43
51
D
TIN1
External clock input pin for reload timer ch1. This
pin can be used as an input when set as the exter-
nal clock input and set as an input port.
P23
45
44
52
D
TO1
I/O port
Event output pin for reload timer ch1. Output oper-
ates when event output is enabled.
P24 to
P27
46 to 49 45 to 48 53 to 56
D
IN0 to
IN3
I/O ports
Trigger input pins for input capture ch0 to ch3.
These pins can be used as an input when set as an
input capture trigger input and set as an input port.
(Continued)
10
DS07-13715-5E
Share Link: 