MB91354A データシートの表示（PDF） - Fujitsu

部品番号

コンポーネント説明

メーカー

MB91354A

32-Bit Proprietary Microcontroller

Fujitsu 

MB91350A Series

Pin no.

82

83

84

85

86

87

88

89

Pin name

PPG1

PN1

PPG2

PN2

PPG3

PN3

PPG4

PN4

PPG5

PN5

SI6

AIN0

TRG0

PM0

SO6

BIN0

TRG1

PM1

SCK6

ZIN0

TRG2

PM2

Circuit

type

Description

PPG timer output pin.

D General purpose I/O. This function is available as a port when the PPG timer out-

put is not in use.

PPG timer output pin.

D General purpose I/O. This function is available as a port when the PPG timer out-

put is not in use.

PPG timer output pin.

D General purpose I/O. This function is available as a port when the PPG timer out-

put is not in use.

PPG timer output pin.

D General purpose I/O. This function is available as a port when the PPG timer out-

put is not in use.

PPG timer output pin.

D General purpose I/O. This function is available as a port when the PPG timer out-

put is not in use.

Data input for serial I/O6. Since this input is used as required when serial I/O 6 is

in input operation, the port output must remain off unless intentionally turned on.

8/16-bit up/down counter input. Since this input is used as required when en-

abled, the port output must remain off unless intentionally turned on.

D

External trigger input for PPG timer0. Since this input is used as required when

enabled, the port output must remain off unless intentionally turned on.

General purpose I/O. This function is available a port when the serial I/O, 8/16-

bit up/down counter, and PPG timer outputs are not in use.

Data output for serial I/O 6. This function is enabled when the serial I/O6 data out-

put is enabled.

8/16-bit up/down counter input. Since this input is used as required when en-

abled, the port output must remain off unless intentionally turned on.

D

External trigger input for PPG timer1. Since this input is used as required when

enabled, the port output must remain off unless intentionally turned on.

General purpose I/O. This function is available a port when the serial I/O, 8/16-

bit up/down counter, and PPG timer outputs are not in use.

Clock input/output for serial I/O 6. This function is enabled when serial I/O6 is us-

ing the external shift clock mode, or serial I/O5 clock output function is enabled.

8/16-bit up/down counter input. Since this input is used as required when en-

abled, the port output must remain off unless intentionally turned on.

D

External trigger input for PPG timer2. Since this input is used as required when

enabled, the port output must remain off unless intentionally turned on.

General purpose I/O. This function is available a port when the serial I/O, 8/16-

bit up/down counter, and PPG timer outputs are not in use.

(Continued)

6

Share Link: