MC100EL90 データシートの表示（PDF） - ON Semiconductor
部品番号
コンポーネント説明
メーカー
MC100EL90 Datasheet PDF : 5 Pages
| |||
MC100EL90
Table 4. NECL DC CHARACTERISTICS VCC = 5.0 V; VEE = −5 V; GND = 0 V (Note 3)
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max
Min Typ Max
Min Typ Max Unit
IEE
VEE Power Supply Current
VIH
Input HIGH Voltage
(Single−Ended)
−1165
8.0
−880
−1165
6.0 8.0
−880
−1165
8.0 mA
−880 mV
VIL
Input LOW Voltage
(Single−Ended)
−1810
−1475 −1810
−1475 −1810
−1475 mV
ECL
VBB
VIHCMR
Output Voltage Reference
−1.38
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 4)
Vpp < 500 mV
Vpp y 500 mV
VEE + 1.3
VEE + 1.5
−1.26 −1.38
−0.4 VEE + 1.2
−0.4 VEE + 1.4
−1.26 −1.38
−0.4 VEE + 1.2
−0.4 VEE + 1.4
−1.26 V
−0.4 V
−0.4 V
IIH
Input HIGH Current
150
150
150 mA
IIL
Input LOW Current
0.5
0.5
0.5
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
3. Input parameters vary 1:1 with GND. VEE can vary −3.0 V / −5.5 V.
4. VIHCMR min varies 1:1 with VEE. VIHCMR max varies 1:1 with GND.
Table 5. AC CHARACTERISTICS VCC = 4.5 to 5.5 V; VEE = −3.0 to −5.5 V; GND = 0 V
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
fmax
Maximum Toggle Frequency
560
650
700
MHz
tPLH
Propagation Delay
tPHL
D to Q
Differential 390
S.E. 340
590 420
640 370
620 460
670 410
660 ps
710
tSKEW
Skew
Output−to−Output (Note 5)
Part−to−Part
(Differential Configuration) (Note 5)
Duty Cycle
(Differential Configuration) (Note 6)
20 100
200
25
20 100
200
25
20 100 ps
200
25
tJITTER Cycle−to−Cycle Jitter
TBD
TBD
TBD
ps
VPP
Input Swing (Note 7)
150
1000 150
1000 150
1000 mV
tr
Output Rise/Fall Times Q
tf
(20% − 80%)
230
500 230
500 230
500 ps
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
5. Skews are valid across specified voltage range, part−to−part skew is for a given temperature.
6. Duty cycle skew is the difference between a TPLH and TPHL propagation delay through a device.
7. VPP(min) is the minimum input swing for which AC parameters are guaranteed. The device has a DC gain of ≈40.
http://onsemi.com
3
Share Link: 