MC100ELT24D データシートの表示（PDF） - ON Semiconductor

部品番号

コンポーネント説明

メーカー

MC100ELT24D

5V
TTL to Differential ECL Translator

ON Semiconductor 

MC10ELT24, MC100ELT24

Table 4. 10ELT SERIES NECL OUTPUT DC CHARACTERISTICS VCC = 5.0 V; VEE = −5.0 V; GND = 0 V (Note 2)

−40°C

25°C

85°C

Symbol

Characteristic

Min Typ Max Min Typ Max Min Typ Max Unit

ICC

VCC Power Supply Current

7.0

4.5 7.0

7.0 mA

IEE

Power Supply Current

18

12.5 18

18 mA

VOH

Output HIGH Voltage (Note 3)

−1080 −990 −890 −980 −895 −810 −910 −815 −720 mV

VOL

Output LOW Voltage (Note 3)

−1950 −1800 −1650 −1950 −1790 −1630 −1950 −1773 −1595 mV

NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit

board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared

operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification

limit values are applied individually under normal operating conditions and not valid simultaneously.

2. Output parameters vary 1:1 with GND. VCC can vary 4.5 V / 5.5 V. VEE can vary −4.2 V / −5.5 V.

3. Outputs are terminated through a 50 W resistor to GND − 2 V.

Table 5. 100ELT SERIES NECL OUTPUT DC CHARACTERISTICS VCC = 5.0 V; VEE = −5.0 V; GND = 0 V (Note 4)

−40°C

25°C

85°C

Symbol

Characteristic

Min Typ Max Min Typ Max Min Typ Max Unit

ICC

VCC Power Supply Current

7.0

4.5 7.0

7.0 mA

IEE

Power Supply Current

VOH

Output HIGH Voltage (Note 5)

VOL

Output LOW Voltage (Note 5)

18

12.5 18

18 mA

−1085 −1005 −880 −1025 −955 −880 −1025 −955 −880 mV

−1830 −1695 −1555 −1810 −1705 −1620 −1810 −1705 −1620 mV

NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit

board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared

operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification

limit values are applied individually under normal operating conditions and not valid simultaneously.

4. Output parameters vary 1:1 with GND. VCC can vary 4.5 V / 5.5 V. VEE can vary −4.2 V / −5.5 V.

5. Outputs are terminated through a 50 W resistor to GND − 2 V.

http://onsemi.com

3

Share Link: