DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MC141585 データシートの表示(PDF) - Motorola => Freescale

部品番号
コンポーネント説明
メーカー
MC141585 Datasheet PDF : 27 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
Output Programmable Delay Register(Row16, Coln5)
7
6
5
4
3
2
1
0
X
X
X
X
X
D2 D1 D0
Bit 7-3 X - Don’t care.
Bit 2-0 D2-D0 - These 3 bits define the propagation delay
of R,G,B and FBKG outputs. When D2-D0 are all zero, there
is no additional delay for outputs. Increase these 3 bits will
increase the additional delay. The default setting after
power on is zero.
vertical delay =
VERTD x 4 + 1 H scan lines
VSYNC
variable number of Hscan lines
Figure 13 illustrates the positions of all display characters on
the screen relative to the leading edge of horizontal and vertical
flyback signals. The shaded area indicates the area not inter-
fered by the display characters. Notice that there are two com-
ponents in the equations stated in Figure 13 for horizontal and
vertical delays: fixed delays from the leading edge of HSYNC
and VSYNC signals, regardless of the values of HORD and
VERTD: (47 dots + phase detection pulse width) and one H
scan line for horizontal and vertical delays, respectively; vari-
able delays determined by the values of HORD and VERTD.
Refer to Frame Control Registers COLN 9 and 10 for the defi-
nitions of VERTD and HORD.
When double character width is selected for a row, only the
even-numbered characters will be displayed, as shown in row
2. Notice that the total number of horizontal scan lines in the
display frame is variable, depending on the chosen character
height of each row. Care should be taken while configuring
each row character height so that the last horizontal scan line
in the display frame always comes out before the leading edge
of VSYNC of next frame to avoid wrapping display characters
of the last few rows in the current frame into the next frame.
Figure 14 illustrates the timing of output signals as a function
of window. Line 3 of the two characters is used to illustrate the
timing signals. The shaded area depicts the window area. The
left hand side characters are embodied in a window.
......
Figure 13. Display Frame Format
MOTOROLA
MC141585
15

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]