MCP9701AT-H/TO データシートの表示（PDF） - Microchip Technology
部品番号
コンポーネント説明
メーカー
MCP9701AT-H/TO Datasheet PDF : 22 Pages
| |||
MCP9700/9700A and MCP9701/9701A
3.0 PIN DESCRIPTIONS
The descriptions of the pins are listed Table 3-1.
TABLE 3-1:
Pin No.
SC70
1
2
3
4
5
PIN FUNCTION TABLE
Pin No.
SOT-23
Pin No.
TO-92
Symbol
—
—
NC
3
3
GND
2
2
VOUT
1
1
VDD
—
—
NC
Function
No Connect (this pin is not connected to the die).
Power Ground Pin
Output Voltage Pin
Power Supply Input
No Connect (this pin is not connected to the die).
3.1 Power Ground Pin (GND)
GND is the system ground pin.
3.2 Output Voltage Pin (VOUT)
The sensor output can be measured at VOUT. The
voltage range over the operating temperature range for
the MCP9700/9700A is 100 mV to 1.75V and for the
MCP9701/9701A, 200 mV to 3V .
3.3 Power Supply Input (VDD)
The operating voltage as specified in the “DC
Electrical Characteristics” table is applied to VDD.
3.4 No Connect Pin (NC)
This pin is not connected to the die. It can be used to
improve thermal conduction to the package by
connecting it to a Printed Circuit Board (PCB) trace
from the thermal source.
© 2009 Microchip Technology Inc.
DS21942E-page 9
Share Link: 