MDS-169 データシートの表示（PDF） - Tyco Electronics

部品番号

コンポーネント説明

メーカー

MDS-169

Termination Insensitive Mixer, 1 MHz - 3.5 GHz

Tyco Electronics 

Termination Insensitive Mixer,

1 MHz - 3.5 GHz

Features

• Intermodulation Ratio is Insensitive to Port

Mismatches

• VSWR: <2.0:1 Typical Midband

• Isolation: 35 dB Typical Midband

• Impedance: 50 Ohms Nominal

• Maximum Input Power: 350 mW Max @ 25°C,

Derated to 85°C @ 3.2 mW/°C

• LO Power: +24 dBm Max.

• MIL-STD-883 Screening Available

Description

The unique design of the termination insensitive

mixer (TIM) enables it to apply high reverse voltage

to diodes during their “off” phase, in the LO cycle.

This allows for higher power level performance with

minimum distortion. In addition the TIM has internal

loads that provide a good match and also absorb

mixer generated LO frequency terms. Combined,

these features give the mixer its

insensitivity to external mismatches, plus superior

VSWR.

C-7 (MDC-169)

FP-2 (MD-169)

SF-1 (MDS-169)

MD-/MDC-/MDS-169

V5

1

M/A-COM Inc. and its affiliates reserve the right to make changes to the

product(s) or information contained herein without notice. M/A-COM makes

no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does M/A-COM assume any liability

whatsoever arising out of the use or application of any product(s) or

information.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

Share Link: