MFRC531 データシートの表示（PDF） - Philips Electronics

部品番号

コンポーネント説明

メーカー

MFRC531

ISO 14443 Reader IC

Philips Electronics 

Philips Semiconductors

ISO 14443 Reader IC

Short From Specification Rev. 2.0 February 2002

MF RC531

4 MIFARE® CLASSIC RELATED ITEMS

4.1 CRYPTO I: Card Authentication

For correct authentication of MIFARE® Classic

products the fast CRYPTO 1 stream cipher is

available. The corresponding keys have to be

programmed into the secure non-volatile key

memory of the MF RC531.

Only two commands need to be sent by

application software to turn on CRYPTO 1

secured communication.

4.1.1 INITIATING CARD AUTHENTICATION

The correct key for the authentication has to be

selected from the secure internal non-volatile key

memory and loaded into the internal CRYPTO1

register. Next the authentication command is

transmitted to the card.

After receiving the first message token from the

card, the µ-Controller has to check the

communication status flags. If communication so

far has been successful the second part of the

authentication procedure can be started.

4.1.2 SECOND PART OF CARD

AUTHENTICATION

Data to be transmitted to the card in this phase

are generated automatically by the internal

CRYPTO 1 unit inside the MF RC531. To request

this action the according command has to be

triggered.

The card will respond with the second message

token. Then the communication status flags have

to be checked by the µ-Controller. If

authentication has been successful further

communication with a MIFARE® Classic card

continues CRYPTO 1 enciphered.

10

PUBLIC

Share Link: