Micrel, Inc.
These statements also apply to the MIC2774H’s RST
output. That is, to ensure valid RST signal levels at VDD <
1.2V, a pull-up resistor (as opposed to a pull-down)
should be added to the RST output. A value of 100kΩ is
typical for this application, as well. See Figure 6.
Figure 5. MIC2774L Valid /RST Below 1.2V
Figure 6. MIC2774H Valid RST Below 1.2V
MIC2774
March 16, 2015
9
Revision 2.0