L6605(2001) データシートの表示（PDF） - Hamamatsu Photonics

部品番号

コンポーネント説明

メーカー

L6605
(Rev.:2001)

60 W XENON FLASH LAMP SERIES BUILT-IN REFLECTIVE MIRROR

Hamamatsu Photonics 

RELATED PRODUCTS

Trigger Socket E6647

In order to operate a Xenon flash lamp, it is necessary to supply the prescribed high voltage between anode and

cathode, and to trigger probes. To facilitate the above operation, the trigger socket consists of high voltage

transformer and voltage divider resistors and capacitors chain to supply the appropriate pulse voltage to each

electrode.

As E6647 radiates heat from its metal parts during the operation due to the input energy, it is recommended to

use a cooling fan to keep the surface temperature of the metal parts at less than 50 °C.

Dimensional Outline (Unit: mm)

14.8±0.1

METAL

RED : MAIN DISCHAGE VOLTAGE

WHITE : TRIGGER VOLTAGE

BLACK : GND (MAIN)

BROWN : GND (TRIGGER)

5.5

28.5±1.0

73.5±2.0

500±20

TLSXA0050EB

Power Supply C6096

C6096 has large capability to operate the lamp stable in spite of its compact dimensions. At 1 J/flash input energy

becomes over 0.05 J, it is necessary to have an additional external capacitor E7289-01 (option).

Specifications

Dimensional Outline (Unit: mm)

Parameter

Description/Value

Main

Power

Supply

Output Voltage g h (dc)

Output Capacity

Stability

Main Supply Capacitor i

300 V to 1000 V

60 W Max.

±1 % Max.

0.1 µF

Trigger Trigger Output Voltage

Section Trigger Capacitor

180 V Typ.

0.22 µF

Trigger Type

Internal / External

Trigger Repetition Rate j

Input Trigger Input Impedance

Section Input Waveform k

10 Hz to 100 Hz

1 kΩ

Rectangular Waveform

Input Voltage

5V

Input Voltage (dc)

24 V ± 1.2 V

Power Consumption

Cooling

90 W

Not Required

Weight

Approx. 550 g

NOTE: g The range of 700 V to 1000 V is used for the operation

of 60 W Xenon flash lamp series.

h In the case of connects temperature sensor lead lines

from the cooling jacket, the output voltage becomes 0 V

when the temperature sensor turns on.

i At 1 J/flash input energy becomes over 0.05 J, it is

necessary to have an additional external capacitor

E7289-01 (option).

j Don’t use beyond 60 Hz at the operation of 60 W input.

k A trigger pulse voltage is supplied to each electrode at

the same time as an input trigger signal rise.

2-M3

108±2

80.0±0.5

14

174±3

100.0±0.5

2-M3

TLSXA0051EA

Share Link: