L6604 データシートの表示（PDF） - Hamamatsu Photonics
部品番号
コンポーネント説明
メーカー
L6604 Datasheet PDF : 4 Pages
| |||
RELATED PRODUCTS
Trigger Socket E6647
In order to operate a Xenon flash lamp, it is necessary to supply the prescribed high voltage between anode and
cathode, and to trigger probes. To facilitate the above operation, the trigger socket consists of high voltage
transformer and voltage divider resistors and capacitors chain to supply the appropriate pulse voltage to each
electrode.
As E6647 radiates heat from its metal parts during the operation due to the input energy, it is recommended to
use a cooling fan to keep the surface temperature of the metal parts at less than 50 °C.
Dimensional Outline (Unit: mm)
14.8±0.1
METAL
RED : MAIN DISCHAGE VOLTAGE
WHITE : TRIGGER VOLTAGE
BLACK : GND (MAIN)
BROWN : GND (TRIGGER)
5.5
28.5±1.0
73.5±2.0
500±20
TLSXA0050EB
* Changing the length of the trigger socket cable vavies the current flowing through
the lamp so the lamp might fail to meet its required specifications. Use the cable length as shipped.
Power Supply C6096
C6096 has large capability to operate the lamp stable in spite of its compact dimensions. When 1 flash input
energy becomes over 0.05 J, it is necessary to have an additional external capacitor E7289-02 (option).
Specifications
Dimensional Outline (Unit: mm)
Parameter
Description/Value
Main
Power
Supply
Output Voltage h i (dc)
Output Capacity
Stability
Main Supply Capacitor j
300 V to 1000 V
60 W Max.
±1 % Max.
0.1 µF
Trigger Trigger Output Voltage
Section Trigger Capacitor
180 V Typ.
0.22 µF
Trigger
Input
Section
Trigger Type
Repetition Rate k
Trigger Input Impedance
Input Waveform m
Internal / External
10 Hz to 100 Hz
360 Ω
Rectangular Waveform
Input Voltage
5V
Input Voltage (dc)
24 V ± 1.2 V
Power Consumption
90 W
Cooling
Not Required
Weight
Approx. 550 g
NOTE: h The range of 700 V to 1000 V is used for the operation
of 60 W Xenon flash lamp series.
i In the case of connects temperature sensor lead lines
from the cooling jacket, the output voltage becomes 0 V
when the temperature sensor turns on.
j When 1 flash input energy becomes over 0.05 J, it is
necessary to have an additional external capacitor
E7289-02 (option).
k Don’t use beyond 60 Hz at the operation of 60 W input.
m A trigger pulse voltage is supplied to each electrode at
the same time as an input trigger signal rise.
2-M3
108±2
80.0±0.5
14
174±3
100.0±0.5
2-M3
TLSXA0051EA
Share Link: 