MSK1901 データシートの表示（PDF） - M.S. Kennedy Corporation

部品番号

コンポーネント説明

メーカー

MSK1901

HIGH SPEED/HIGH VOLTAGE VIDEO DISPLAY DRIVER

M.S. Kennedy Corporation 

TYPICAL CONNECTION CIRCUIT

The connection circuit shown above is for the MSK 1901. The RL and LP are external components and must

not be located near ground planes if possible. A high quality resistor such as Bradford Electronics P/N FP10-200

is reqired for optimum response times. Use an inductor with a high self-resonant frequency that can withstand

the currents required for the application. The ferrite beads should be located as close to the DUT as possible.

Fare-Rite Corporation P/N 2743001111 beads work well for most applications. For additional applications informa-

tion, please contact MSK. Evaluation amplifiers with test boards are readily available upon request.

NOTES:

5

Rev. A 5/02

Share Link: