MSM7541GS-K データシートの表示（PDF） - Oki Electric Industry

部品番号

コンポーネント説明

メーカー

MSM7541GS-K

Single Rail CODEC

Oki Electric Industry 

¡ Semiconductor

MSM7541/7542

DG

Ground for the digital signal circuits.

This ground is separate from the analog signal ground. The DG pin must be connected to the AG

pin on the printed circuit board to make a common analog ground.

PDN

Power down control signal.

A logic "0" level drives both transmit and receive circuits to a power down state.

PCMOUT

PCM signal output.

The PCM output signal is output from MSD in a sequential order, synchronizing with the rising

edge of the BCLOCK signal.

MSD may be output at the rising edge of the XSYNC signal, based on the timing between

BCLOCK and XSYNC.

This pin is in a high impedance state except during 8-bit PCM output. It is also in a high

impedance state during power saving or power down modes.

A pull-up resistor must be connected to this pin because its output is configured as an open drain.

This device is compatible with the ITU-T recommendation on coding law and output coding

format.

The MSM7542(A-law) outputs the character signal, inverting the even bits.

Input/Output Level

+Full scale

+0

–0

–Full scale

PCMIN/PCMOUT

MSM7541 (m-law)

MSM7542 (A-law)

MSD

MSD

1000 0000

1010 1010

1111 1111

1101 0101

0111 1111

0101 0101

0000 0000

0010 1010

7/20

Share Link: