PSPICE MODEL
Fig A12 : PSpice model of one EMIF02-600FU7cell
5nH
Input
600 Ω
Dzin
1Ω
5nH
Dzout
Output
1Ω
EMIF02-600FU7
0.85nH
GND
Figure A12 shows the PSpice model of one cell of the EMIF02-600FU7. In this model, the clamping diodes (Dzin and Dzout)
are defined by the following PSpice parameters :
RS = 0.55
Cjo = 100p
M = 0.3333
VJ = 0.6
BV = 7
IBV = 1u
This model is available for frequency simulation and for ambient temperature of 27°C.
The comparison between the PSpice simulation and the measured frequency response is given in figáA13. This shows that
the PSpice model is very close to the product behavior.
Fig A13 : Comparison between PSpice simulation and measured frequency response
dBm
0
-10
-20
PSpice
Model
Measured
(smooth)
-30
-40
1
F(MHz)
10
100
1000
7/9