NCV7356(2004) データシートの表示（PDF） - ON Semiconductor
部品番号
コンポーネント説明
メーカー
NCV7356 Datasheet PDF : 14 Pages
| |||
NCV7356
Electrical Specification
All voltages are referenced to ground (GND). Positive
currents flow into the IC. The maximum ratings given in
the table below are limiting values that do not lead to a
permanent damage of the device but exceeding any of these
limits may do so. Long term exposure to limiting values
may affect the reliability of the device.
MAXIMUM RATINGS
Rating
Supply Voltage, Normal Operation
Short−Term Supply Voltage, Transient
Symbol
VBAT
VBAT.LD
Condition
−
Load Dump; t < 500 ms
Transient Supply Voltage
Transient Supply Voltage
Transient Supply Voltage
CANH Voltage
VBAT.TR1
VBAT.TR2
VBAT.TR3
VCANH
Transient Bus Voltage
Transient Bus Voltage
Transient Bus Voltage
DC Voltage on Pin LOAD
DC Voltage on Pins TxD, MODE1, MODE0, RxD
ESD Capability of CANH
VCANHTR1
VCANHTR2
VCANHTR3
VLOAD
VDC
VESDBUS
ESD Capability of Any Other Pins
VESD
Maximum Latch−Up Free Current at Any Pin
Maximum Power Dissipation
ILATCH
Ptot
Jump Start; t < 1.0 min
ISO 7637/1 Pulse 1 (Note 1)
ISO 7637/1 Pulses 2 (Note 1)
ISO 7637/1 Pulses 3A, 3B
VBAT < 27 V
VBAT = 0 V
ISO 7637/1 Pulse 1 (Note 2)
ISO 7637/1 Pulses 2 (Note 2)
ISO 7637/1 Pulses 3A, 3B (Note 2)
Via RT > 2.0 kW
−
Human Body Model
Eq. to Discharge 100 pF with 1.5 kW
Human Body Model
Eq. to Discharge 100 pF with 1.5 kW
−
At TA = 125°C
Thermal Impedance
qJA
In Free Air
Storage Temperature
TSTG
−
Junction Temperature
TJ
−
Lead Temperature Soldering
Reflow: (SMD styles only)
Tsld
60 second maximum above 183°C
−5°C/+0°C allowable conditions
1. ISO 7637 test pulses are applied to VBAT via a reverse polarity diode and >1.0 mF blocking capacitor.
2. ISO 7637 test pulses are applied to CANH via a coupling capacitance of 1.0 nF.
3. The application board shall be realized with a ground copper foil area > 150 mm2.
Min
−0.3
−
−
−50
−
−200
−20
−40
−50
−
−200
−40
−0.3
−4000
Max
18
40
27
−
100
200
40
−
100
200
40
7.0
4000
Unit
V
V
(peak)
V
V
V
V
V
V
V
V
V
V
V
−2000
2000
V
−500
−
−
−55
−40
−
500
>400
(Note 3)
<70
150
150
240 peak
mA
mW
°C/W
°C
°C
°C
http://onsemi.com
5
Share Link: 