NJM2741 Preliminary
■ ABSOLUTE MAXIMUM RATINGS
PARAMETER
Supply Voltage
SYMBOL
V+
RATINGS
15
Differential Input Voltage Range
VID
Common Mode Input Voltage Range
VICM
±15 (Note1)
0 to 15 (Note1)
Power Dissipation
PD
390[MTP5] (Note2)
280[SC88A] (Note2)
Operating Temperature Range
Topr
Storage Temperature Range
Tstg
-40 to +85
-50 to +125
(Note1) For supply voltage less than 15V, the absolute maximum input voltage is equal to the supply voltage.
(Note2) On the PCB “ EIA/JEDEC (76.2×114.3×1.6mm, two layers, FR-4) “
UNIT
V
V
V
mW
˚C
˚C
■ OPERATING VOLTAGE (Ta=25˚C)
PARAMETER
SYMBOL
Supply Voltage
V+
RATINGS
2.5 to 14
UNIT
V
■ ELECTRICAL CHARACTERISTICS
●DC CHARACTERISTICS (V+=5V,Ta=25˚C)
PARAMETER
SYMBOL
Operating Current
ICC
TEST CONDITION
RL=∞, VIN=2.5V,
No Signal Apply
MIN.
TYP.
MAX.
UNIT
-
2.2
3.3
mA
Input Offset Voltage
Input Bias Current
Input Offset Current
Large Signal Voltage Gain
VIO
RS ≤ 10kΩ
-
1
6
mV
IB
-
100
350
nA
IIO
-
5
100
nA
AV
RL≥10kΩ to 2.5V,
65
85
-
dB
Vo=0.5V to 4.5V
Common Mode Rejection Ratio
CMR
0V ≤ VCM ≤ 4V
60
75
Supply Voltage Rejection Ratio
SVR
V+=2.5V to 14V, VCM=V+/2
60
80
-
dB
-
dB
Output Voltage
VOH
RL=5kΩ to 2.5V
4.75
4.9
-
V
VOL
RL=5kΩ to 2.5V
-
0.1
0.25
V
Input Common Mode
Voltage Range
VICM
CMR ≥ 60dB
0
-
4
V
●AC CHARACTERISTICS (V+=5V,Ta=25˚C)
PARAMETER
SYMBOL
TEST CONDITION
Unity Gain Bandwidth
Phase Margin
Equivalent Input Noise Voltage
Total Harmonic Distortion
GB
ΦM
VNI
THD
f=10kHz, RL=10kΩ to 2.5V
RL=10kΩ to 2.5V, CL=10pF
f=1kHz, VCM=2.5V
f=1kHz, AV=+2
RL=10kΩ to 2.5V, Vo=1.5Vrms
MIN.
-
-
-
-
TYP.
10
75
10
0.001
MAX.
-
-
-
-
UNIT
MHz
Deg
nV/√Hz
%
●AC CHARACTERISTICS (V+=5V,Ta=25˚C)
PARAMETER
SYMBOL
TEST CONDITION
MIN.
TYP.
MAX.
UNIT
Slew Rate
SR
(Note 3), AV=1, VIN=2Vpp
-
3.5
-
V/µs
RL=10kΩ to 2.5V, CL=10pF
(Note 3) Number specified is the slower of the positive and negative slew rates.
[CAUTION]
The specifications on this data book are only given for information,
without any guarantee as regards either mistakes or omissions. The
application circuits in this data book are described only to show
representative usages of the product and not intended for the
guarantee or permission of any right including the industrial rights.
-2-
Ver.2004-11-26