NJU8713
TERMINAL DESCRIPTION
No.
SYMBOL
I/O
Function
13
VDD
- Operation Power Supply, VDD=2V
2
VSS
- Operation Power GND, VSS=0V
7
8
VDDO
Driving Power Supply, VDDO=2V
-
Terminal No.7 and No.8 should be connected to the same electric
potential.
5
10
VSSO
Driving Power GND, VSSO=0V
-
Terminal No.5 and No.10 should be connected to the same electric
potential.
Master Clock Input Terminal
1
MCK
I
The condition of the data input terminal is fetched with the rising
edge of this signal.
4
11
EN1
EN2
I
Output Control Terminal
Output circuit is selected by the condition of this terminal.
3
12
IN1
IN2
I
Audio Signal Input Terminal
1-bit Audio Signal inputs into this terminal.
14
BEEP
I
Beep Signal Input Terminal
Beep signal inputs into this terminal.
Output Terminal
• When Output Terminal selects Audio Signal, IN1 terminal input data
6
9
OUT1
OUT2
O
outputs from OUT1 terminal and IN2 terminal input data outputs from
OUT2 terminal.
• When Output Terminal selects Beep Signal, BEEP terminal input
data outputs from OUT1 and OUT2 terminals.
INPUT TERMINAL STRUCTURE
VDD
Input Terminal
VSS
Inside Circuit
-2-
Ver.2004-06-02