NJU38575859
FUNCTIONAL DESCRIPTION
(1) IN terminal (Input Signal)
The input signals are PWM signals or PDM signals.
(2) OUTP and OUTN terminal (Output Signal)
The OUTP and OUTN generate PMW output signal The NJU8789 drives a speaker by the BTL output, and
OUTP is a positive output and OUTN is a negative outputs.
A switching regulator with a high response against a voltage fluctuation is the best selection for the VDDO,
which is the power supply for output drivers.
(3) Standby Control Function
By setting the STBYb terminal to “L”, the NJU8789 becomes standby condition. During standby condition,
OUTP and OUTN are in Hi-Z.
The STBYb terminal must be connected to VDD when not using the Standby Function.
Ver.2009-01-21
-3-