NTE9370 データシートの表示（PDF） - NTE Electronics

部品番号

コンポーネント説明

メーカー

NTE9370

Integrated Circuit HTL, Quad D–Type Flip–Flop

NTE Electronics 

NTE9370

Integrated Circuit

HTL, Quad D–Type Flip–Flop

Description:

Four D–type flip–flops utilizing a common clock line make up the NTE9370. Each flip–flop has compli-

mentary passive pull up outputs with a single D input. This circuit is ideal as a quad latch for temporary

storage of 4–bit binary numbers.

Data is transferred from D inputs to outputs when the clock line is low. With the clock line high, output

data is held and D inputs are ignored.

Absolute Maximum Ratings:

Supply Voltage:

Continuous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.5V

Pulsed (< 0.1sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18V

Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5V to 16.5V

Voltage Applied to Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5V to +16.5V

Continuous Sink Current (TA = +25°C):

Continuous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15mA

Surge (< 1sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA

Output Short Circuit Duration to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Continuous

Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –30° to +85°C

Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +100°C

Lead Temperature (During Soldering, 1/16” from case, 10sec max), TL . . . . . . . . . . . . . . . . . +300°C

Electrical Characteristics: (VCC = 12V ±1V unless otherwise specified)

Parameter

Symbol

Test Conditions

Input Threshold Voltage, Low

Input Threshold Voltage, High

Input Current, Low (1 Unit Load)

VIL Guaranteed input low threshold for all inputs

VIH Guaranteed input high threshold for all inputs

IIL VCC = Max, VIN = VOL1 max

Input Leakage Current (1 Unit Load) IIH VCC = Max, VIN = VCC

Output Low Voltage

Output High Voltage

Test Supply Voltage

VOL

VOH

VCC

VCC = Min, VIL = 5V VIH = 6.5V,

IOL = F.O. x U.L.

Min Typ Max Unit

5––V

– – 6.5 V

– – 2.1 mA

– – 10 µA

– – 1.5 V

10 – – V

11 12 13 V

Note 1. F.O. is fanout in unit loads (U.L.). A unit load is defined by the above input specifications.

Share Link: