OPB901L55 データシートの表示（PDF） - Optek Technology

部品番号

コンポーネント説明

メーカー

OPB901L55

Photologic® Slotted Optical Switch “Wide Gap” Series

Optek Technology 

Photologic® Slotted Optical Switch

“Wide Gap” Series

OPB900 through OPB913 Series (L, W__Z)

[ MILLIMETERS]

DIMENSIONS ARE IN:

INCHES

Color-Pin # Description Color-Pin # Description Color-Pin # Description Color-Pin # Description Color-Pin # Description

Red-1

Anode

Black-2

Cathode

White-3

VCC

Blue-4

Output

Green-5

Ground

Absolute Maximum Ratings (TA = -40°C to + 70° Unless otherwise noted)

Storage Temperature

-40° C to +85° C

Operating Temperature

Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron)(1)

Input Infrared LED

-40° C to +70° C

260° C

DC Forward Diode (LED) Current

40 mA

DC Reverse Diode (LED) Voltage

Input Diode Power Dissipation(1)

2V

100 mW

Output Photologic®

Supply Voltage, VCC (not to exceed 3 seconds)

Voltage at Output Lead (Open Collector Output version)

Output Photologic® Power Dissipation(2)

Total Device Power Dissipation(3)

10V

35 V

200 mW

300 mW

Notes:

(1) Derate linearly 2.22 mW/°C above 25°C

(2) Derate linearly 4.44 mW/°C above 25°C

(3) Derate linearly 6.66 mW/°C above 25°C

(4) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.

(5) Methanol or isopropanol are recommended as cleaning agents. The plastic housing is soluble in chlorinated hydrocarbons and

keytones.

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Issue A.2 09/06

Page 2 of 4

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747

FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Share Link: