PCK2001 データシートの表示（PDF） - Philips Electronics

部品番号

コンポーネント説明

メーカー

PCK2001

14.318–150 MHz I2C 1:18 clock buffer

Philips Electronics 

Philips Semiconductors

14.318–150 MHz I2C 1:18 clock buffer

Product data

PCK2001

SERIAL CONFIGURATION MAP

The serial bits will be read by the clock buffer in the following order:

Byte 0 – Bits 7, 6, 5, 4, 3, 2, 1, 0

Byte 1 – Bits 7, 6, 5, 4, 3, 2, 1, 0

Byte 2 – Bits 7, 6, 5, 4, 3, 2, 1, 0

All unused register bits (Reserved and N/A) should be defined as “Don’t Care”. It is expected that the controller will force all of these bits to a “0”

level.

All register bits labeled “Initialize to 0” must be written to zero during initialization. Failure to do so may result in a higher than normal operating

current. The controller will read back the last written value.

Byte 0: Output active/inactive register

1 = enable; 0 = disable

BIT

PIN#

NAME

DESCRIPTION

7

18

BUF_OUT7

Active/Inactive

6

17

BUF_OUT6

Active/Inactive

5

14

BUF_OUT5

Active/Inactive

4

13

BUF_OUT4

Active/Inactive

3

9

BUF_OUT3

Active/Inactive

2

8

BUF_OUT2

Active/Inactive

1

5

BUF_OUT1

Active/Inactive

0

4

BUF_OUT0

Active/Inactive

NOTE:

1. Inactive means outputs are held LOW and are disabled from switching. These outputs are designed to be configured at power-on and are

not expected to be configured during the normal modes of operation.

Byte 1: Output active/inactive register

1 = enable; 0 = disable

BIT

PIN#

NAME

DESCRIPTION

7

45

BUF_OUT15

Active/Inactive

6

44

BUF_OUT14

Active/Inactive

5

41

BUF_OUT13

Active/Inactive

4

40

BUF_OUT12

Active/Inactive

3

36

BUF_OUT11

Active/Inactive

2

35

BUF_OUT10

Active/Inactive

1

32

BUF_OUT9

Active/Inactive

0

31

BUF_OUT8

Active/Inactive

NOTE:

1. Inactive means outputs are held LOW and are disabled from switching. These outputs are designed to be configured at power-on and are

not expected to be configured during the normal modes of operation.

Byte 2: Optional register for possible future requirements

BIT

PIN#

NAME

DESCRIPTION

7

28

BUF_OUT17

Active/Inactive

6

21

BUF_OUT16

Active/Inactive

5

—

(reserved)

(reserved)

4

—

(reserved)

(reserved)

3

—

(reserved)

(reserved)

2

—

(reserved)

(reserved)

1

—

(reserved)

(reserved)

0

—

(reserved)

(reserved)

NOTE:

1. Inactive means outputs are held LOW and are disabled from switching. These outputs are designed to be configured at power-on and are

not expected to be configured during the normal modes of operation.

2002 Jun 03

10

Share Link: