3511-51 データシートの表示（PDF） - Peregrine Semiconductor Corp.
部品番号
コンポーネント説明
メーカー
3511-51 Datasheet PDF : 9 Pages
| |||
Product Description
The PE3511 is a high-performance static UltraCMOS™
prescaler with a fixed divide ratio of 2. Its operating frequency
range is DC to 1500 MHz. The PE3511 operates on a nominal
3 V supply and draws only 8 mA. The input and output
interfaces support both AC-coupled, low-Z RF as well as direct
connection to low voltage positive logic devices. It is packaged
in a small 6-lead SC-70 and is ideal for frequency scaling
solutions
The PE3511 is manufactured on Peregrine’s UltraCMOS™
process, a patented variation of silicon-on-insulator (SOI)
technology on a sapphire substrate, offering the performance
of GaAs with the economy and integration of conventional
CMOS.
Product Specification
PE3511
1500 MHz Low Power UltraCMOS™
Divide-by-2 Prescaler
Features
• DC to 1500 MHz operation
• Fixed divide ratio of 2
• Low-power consumption: 8 mA typical
@ 3V
• RF or LV Digital Interface
• Ultra-small package: 6-lead SC-70
Figure 1. Functional Schematic Diagram
Figure 2. Package Type
6-lead SC70
IN
PREAMP
D
Q
CLK
QB
OUT
DRIVER OUTPUT BUFFER
Table 1. Electrical Specifications (ZS = ZL = 50 Ω)
VDD = 3.0 V, -40° C ≤ TA ≤ 85° C, unless otherwise specified
Parameter
Conditions
Minimum
Supply Voltage
2.85
Supply Current
Input Frequency (Fin)
DC
Input Power (Pin)
DC < Fin ≤ 1000 MHz (Note 1)
-10
1000 MHz < Fin ≤ 1500
0
Output Power (Pout)
DC < Fin ≤ 1500 MHz
2
Typical
3.0
8
Maximum
3.15
12
1500
+10
Units
V
mA
MHz
dBm
dBm
dBm
Note 1: CMOS logic levels can be used to drive the reference input if DC coupled. Voltage input needs to be a minimum of 0.5 Vp-p. The
input edge rate should be faster than 80mV/ns from DC - 10 MHz.
Document No. 70-0106-06 │ www.psemi.com
©2003-2008 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 9
Share Link: 