EK4259-02 データシートの表示（PDF） - Peregrine Semiconductor
部品番号
コンポーネント説明
メーカー
EK4259-02 Datasheet PDF : 11 Pages
| |||
Figure 16. Package Drawing Hana - JX (China)
6‐lead SC‐70
PE4259
Product Specification
NOTE: 1. CONTROLLING DIMENSION: MILLIMETER. CONVERTED INCH
DIMENSION ARE NOT NECESSARILY EXACTY.
2. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1994.
3. DIMENSION “D” DOES NOT INCLUDE MOLD FLASH, PROTRUSION OR
GATE BURR, MOLD FLASH, PROTRUSION OR GAT BURR SHALL NOT
EXCEED 0.15MM(0.006”) PER END.
DIMENSION E1 DO NOT INCLUDE INTER-LEAD FLASH OR PROTRUSION,
INTER-LEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.15MM
(0.006”) PER SIDE.
4. THE PACKAGE TOP BE SMALLER THAN THE PACKAGE BOTTOM.
DIMENSION D AND E1 ARE DETERMINED AT THE OUTERMOST
EXTREMES OF THE PLASTIC BODY EXCLUSIVE OF MOLD FLASH, TIE
BAR BURRS, GATE BURRS AND INTERLEAD FLASH, BUT INCLUDING
ANY MISMATCH BETWEEN THE TOP AND BOTTOM OF THE PLASTIC
BODY.
COMMON
Symbol DIMENSIONS MILLIMETER DIMENSIONS INCH
MIN NOM MAX MIN NOM MAX
A
0.80
1.10 0.031
0.043
A1
0
0.10
0
0.004
A2
0.80 0.90 1.00 0.031 0.035 0.040
b
0.15
0.30 0.006
0.012
b2
0.15 0.20 0.25 0.006 0.008 0.010
c
0.08
0.25 0.003
0.010
c1
0.08 0.13 0.20 0.003 0.005 0.008
D
1.90 2.10 2.15 0.074 0.082 0.084
E
2.00 2.10 2.20 0.078 0.082 0.086
E1
1.15 1.25 1.35 0.045 0.050 0.055
e
0.65 BSC
0.0255 BSC
e1
1.30 BSC
0.0512 BSC
L
0.26 0.36 0.46 0.010 0.014 0.018
0°
8°
0°
8°
4°
10°
4°
10°
Figure 17. Differences Between Hana-AYT and Hana-JX Parts
PE4259 POD Differences
Dimension
C
Dmin
Dnom
Emin
E1min
E1max
AYT
0.25 mm
1.9 mm
2.1 mm
2.0 mm
1.15 mm
1.35 mm
JX
0.22 mm
1.85 mm
2.0 mm
1.95 mm
1.1 mm
1.4 mm
©2005-2012 Peregrine Semiconductor Corp. All rights reserved.
Page 10 of 11
Document No. 70-0134-10 │ UltraCMOS™ RFIC Solutions
Share Link: 