PE9309 データシートの表示（PDF） - Pasternack Enterprises, Inc.
部品番号
コンポーネント説明
メーカー
PE9309 Datasheet PDF : 3 Pages
| |||
SMB Tee Adapter Plug-Jack-Jack
RF Adapters Technical Data Sheet
PE9309
Configuration
• SMB Plug Connector 1
• SMB Jack Connector 2
Features
• SMB interface compliant with MIL-STD-348
• Contact plating according to MIL-G-45204
Applications
• General Purpose Test
.
• 50 Ohms
• Tee Body Geometry
• Gold Plated Beryllium Copper Contact
Description
Pasternack’s PE9309 SMB tee adapter plug-jack-jack is part of our full line of RF components available for same-day shipping.
Our SMB tee adapter has a plug-jack-jack gender configuration. Tee adapters (also called tee connectors) are three port
devices that can be used to split or combine a signal. Unlike power dividers/combiners, however, they do not provide matched
impedance at all ports.
RF adapters are often used to enable connections between two connector types that would otherwise not mate. Certain
adapter configurations can also be used to protect connectors on expensive equipment where the number of connect/
disconnect cycles is high. An RF, microwave or millimeter wave adapter is connected to the equipment, and the commonly
changed connection is made with the adapter which can be easily replaced when it wears out after high usage; such adapters
are referred to as connector savers. Pasternack also offers bulkhead, panel mount, hermetically sealed, reverse polarity, and
isolated ground adapter varieties to serve all of your RF, microwave and millimeter wave needs.
Mechanical Specifications
Size
Length
Width
Height
Weight
.
0.788 in [20.02 mm]
0.25 in [6.35 mm]
0.525 in [13.34 mm]
0.009 lbs [4.08 g]
Description
Connector 1
Connector 2
Type
SMB Plug
SMB Jack
Polarity
Standard
Standard
Interface Specification
MIL-STD-348
MIL-STD-348
.
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: SMB Tee Adapter Plug-Jack-Jack PE9309
PE9309 REV 1.1
1
Share Link: 