PE9350 データシートの表示（PDF） - Pasternack Enterprises, Inc.
部品番号
コンポーネント説明
メーカー
PE9350 Datasheet PDF : 5 Pages
| |||
50 Ohm N Female to 75 Ohm N Male Adapter
RF Adapters Technical Data Sheet
PE9350
Configuration
• N Female Connector 1
• N Male Connector 2
Features
• Typical VSWR of 1.4:1 up to 500 MHz
• N Interface compliant with MIL-C-39012
Applications
• General Purpose Test
.
• 50 Ohms, 75 Ohms
• Straight Body Geometry
• Gold Plated Brass Contact
• 3 µ-in min Gold Contact Plating
Description
Pasternack’s PE9350 50 ohm type N female to 75 ohm type N male adapter is part of our full line of RF components available
for same-day shipping. PE9350 type N female to type N male adapter operates to 500 MHz.
RF adapters are often used to enable connections between two connector types that would otherwise not mate. Certain
adapter configurations can also be used to protect connectors on expensive equipment where the number of connect/
disconnect cycles is high. An RF, microwave or millimeter wave adapter is connected to the equipment, and the commonly
changed connection is made with the adapter which can be easily replaced when it wears out after high usage; such adapters
are referred to as connector savers. Pasternack also offers bulkhead, panel mount, hermetically sealed, reverse polarity, and
isolated ground adapter varieties to serve all of your RF, microwave and millimeter wave needs.
Electrical Specifications
Description
Minimum
Typical
Maximum
Units
Frequency Range
DC
500
MHz
VSWR 1.4:1
..
Electrical Specification Notes:
Values at 25°C, sea level.
Mechanical Specifications
Size
Length
Width
Weight
.
1.39 in [35.31 mm]
0.827 in [21.01 mm]
0.116 lbs [52.62 g]
Description
Connector 1
Connector 2
Type
N Female
N Male
Polarity
Standard
Standard
Interface Specification
MIL-C-39012
MIL-C-39012
.
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 50 Ohm N Female to 75 Ohm N Male Adapter PE9350
PE9350 REV 1.1
1
Share Link: 