DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

PE9379 データシートの表示(PDF) - Pasternack Enterprises, Inc.

部品番号
コンポーネント説明
メーカー
PE9379
PASTERNACK
Pasternack Enterprises, Inc. PASTERNACK
PE9379 Datasheet PDF : 3 Pages
1 2 3
SMA Male to SMA Male Tee Adapter
RF Adapters Technical Data Sheet
PE9379
Configuration
• SMA Male Connector 1
• SMA Male Connector 2
Features
• SMA Interface compliant with MIL-STD-348
• Gold Plated Contact
Applications
• General Purpose Test
.
• 50 Ohms
• Tee Body Geometry
• Contact Plating per MIL-G-45204
Description
Pasternack’s PE9379 SMA male to SMA male tee adapter is part of our full line of RF components available for same-day
shipping. The SMA connector mates mechanically with commercially available 3.5mm and 2.92mm (K) connectors. Our SMA
tee adapter has a male-male-male gender configuration. Tee adapters (also called tee connectors) are three port devices that
can be used to split or combine a signal. Unlike power dividers/combiners, however, they do not provide matched impedance
at all ports.
RF adapters are often used to enable connections between two connector types that would otherwise not mate. Certain
adapter configurations can also be used to protect connectors on expensive equipment where the number of connect/
disconnect cycles is high. An RF, microwave or millimeter wave adapter is connected to the equipment, and the commonly
changed connection is made with the adapter which can be easily replaced when it wears out after high usage; such adapters
are referred to as connector savers. Pasternack also offers bulkhead, panel mount, hermetically sealed, reverse polarity, and
isolated ground adapter varieties to serve all of your RF, microwave and millimeter wave needs.
Mechanical Specifications
Size
Length
Width
Height
Weight
.
1.1 in [27.94 mm]
0.312 in [7.92 mm]
0.7 in [17.78 mm]
0.022 lbs [9.98 g]
Description
Connector 1
Connector 2
Type
SMA Male
SMA Male
Polarity
Standard
Standard
Interface Specification
MIL-STD-348
MIL-STD-348
Hex Size
5/16 in.
5/16 in.
Mating Torque
3 to 5 in-lbs [0.34 to 0.57 Nm]
3 to 5 in-lbs [0.34 to 0.57 Nm]
.
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: SMA Male to SMA Male Tee Adapter PE9379
PE9379 REV 1.1
1

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]