PI5V330Q データシートの表示（PDF） - Pericom Semiconductor

部品番号

コンポーネント説明

メーカー

PI5V330Q

Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux

Pericom Semiconductor 

PI5V330

Low On-Resistance Wideband/Video

Quad 2-Channel Mux/DeMux

Maximum Ratings

(Above which the useful life may be impaired. For user guidelines, not tested.)

Storage Temperature ..........................................................–65°C to +150°C

Ambient Temperature with Power Applied .........................–40°C to +85°C

Supply Voltage to Ground Potential (Inputs & VCC Only)...–0.5V to +7.0V

Supply Voltage to Ground Potential (Outputs & D/O Only) –0.5V to +7.0V

DC Input Voltage ..................................................................–0.5V to +7.0V

DC Output Current.............................................................................120mA

Note:

Stresses greater than those listed under MAXIMUM RAT-

INGS may cause permanent damage to the device. This is

a stress rating only and functional operation of the device

at these or any other conditions above those indicated in the

operational sections of this specification is not implied. Ex-

posure to absolute maximum rating conditions for extended

periods may affect reliability.

Power Dissipation .................................................................................0.5W

DC Electrical Characteristics (Over the Operating Range, TA = –40°C to +85°C, VCC = 5V ±5%)

Parameters

Description

Test Conditions(1)

Min. Typ.(2)

VANALOG Analog Signal Range

0

-

VIH

Input HIGH Voltage

Guaranteed Logic HIGH Level

2.0

-

VIL

Input LOW Voltage

Guaranteed Logic LOW Level

–0.5

-

IIH

Input HIGH Current

VCC = Max., VIN = VCC

-

-

IIL

Input LOW Current

VCC = Max., VIN = GND

-

-

IO

Analog Output Leakage Current 0 ≤ S1, S2 or D ≤ VCC, Switch OFF

-

-

VIK

Clamp Diode Voltage

IOS

Short Circut Current(3)

VCC = Min., IIN = -18mA

S1, S2, D = 0V VCC

-0.7 -1.2

100

-

VH

Input Hysteresis at Control Pins

-

150

RON

Switch On-Resistance(4)

VCC = Min., VIN = 1.0V,

RL = 75Ω, ION = 13mA

VCC = Min., VIN = 2.0V,

RL = 75Ω, ION = 26mA

-

3

-

7

Max.

2.0

-

0.8

±1

±1

±1

-

-

7

10

Units

V

µA

V

mA

mV

Ω

Notes:

1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.

2. Typical values are at VCC = 5.0V, TA = 25°C ambient and maximum loading.

3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.

4. Measured by the voltage drop between S1, S2, and D I/O pins at indicated current through the switch. On-Resistance is determined by the

lower of the voltages on the S1, S2, and D I/O pins.

2

PS7032F

09/09/04

Share Link: