PI5V330Q データシートの表示（PDF） - Pericom Semiconductor
部品番号
コンポーネント説明
メーカー
PI5V330Q Datasheet PDF : 9 Pages
| |||
PI5V330
Low On-Resistance Wideband/Video
Quad 2-Channel Mux/DeMux
Dynamic Characteristics (Over the Operating Range, TA = –40°C to +85°C, VCC = 5V ±5%)
Parameters
Description
Test Conditions
Min. Typ. Max. Unit
tON
tOFF
BW(1)
Turn On Time
Turn Off Time
-3 dB Bandwidth
RL = 75Ω, CL = 20PF, See Fig. 6
RL = 75Ω, CL = 20PF, See Fig. 6
RL = 150Ω, See Fig. 7
-
2.5
-
1.1
180 400
5
ns
5
- MHz
XTALK
Crosstalk
RIN = 10Ω; RL = 150Ω, 10MHz, See Fig. 7
-
-58
-
dB
DG
Differential Gain
RL = 150Ω, f = 3.58 MHz, See Fig. 5
- 0.64
-
%
DP
CIN(1)
COFF(1)
Differential Phase
Input/Enable Capacitance
Capacitance, Switch Off
RL = 150Ω, f = 3.58 MHz, See Fig. 5
VIN = 0V, f = 1 MHz
VIN = 0V, f = 1 MHz
- 0.27
- Deg.
-
-
-
-
6
6
pF
CON(1)
Capacitance, Switch On
VIN = 0V, f = 1 MHz
OIRR
Off Isolation
RL = 150Ω, 10MHz, See Fig 7
Notes:
1. This parameter is determined by device characterization but is not production tested.
-
-
8
-
-38
-
dB
Power Supply Characteristics
Parameters
Description
Test Conditions(1)
Min. Typ(2) Max. Units
ICC
Quiescent Power
Supply Current
VCC = Max.
IN = GND or VCC -
0.1 3.0 µA
∆ICC
Supply Current per Input
@ TTL HIGH
VCC = Max.
IN = 3.4V(3)
-
-
2.5 mA
ICCD
Supply Current per Input
per MHz(4)
VCC = Max., S1, S2 and D
Pins Open EN = GND
Control Input Toggling
50%Duty Cycle
-
0.25
mA/
MHz
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device.
2. Typical values are at VCC = 5.0V, +25°C ambient.
3. Per TTL driven input (VIN = 3.4V, control inputs only); S1, S2, and D pins do not contribute to ICC.
4. This current applies to the control inputs only and represent the current required to switch internal capacitance at the specified frequency. The
S1, S2, and D I/O pins generate no significant AC or DC currents as they transition. This parameter is not tested, but is guaranteed by design.
3
PS7032F
09/09/04
Share Link: 